(03-19-2023, 05:08 AM)PhenomKing Wrote: [ -> ] (09-07-2021, 02:36 PM)Aztec2012 Wrote: [ -> ]How to unlock Bare Knuckles Boxing Pack on RPCS3? All other works.
I know this is pretty old. But some how I got bare knuckle to show up on my RPCS3. Not sure how.
So there is a way to get bare knuckles to work as well as all the fighter DLCs which I was able to figure out. I tried making a post about this which had a video linked I made explaining how to get it all to work but I because my tutorial had the link for the files it couldn’t be posted :/ so I’m going to try making a new one without linking anything to hopefully help out, I’ve worked for quite a while with this game to finally get it all to work right so I hope I can figure out how to help everyone with this.
For now here are the steps to do so if you can follow along and have the DLC pkg files needed in order to use bare knuckles and unlock all the fighters.
Important things to note first, I am on firmware 4.88 if it makes a difference, and a fresh install of RPCS3.
1. Install FNC to RPCS3
2. Launch first time and let it run until it does its first steps and takes you to the start menu
3. Close out and install 1.02 update.
4. Re-Launch and start the game and then close at any point once the champion mode prison match starts.
5. Install the bare knuckles and fighters pkg files.
6. Right click on the game and open the option for “patches” or something along those lines, when it opens and pops up with the patch update box press ok, then press apply and close the window
7. Start the game again and you should now have the bare knuckle and fighters all there to use
(03-19-2023, 05:08 AM)PhenomKing Wrote: [ -> ] (09-07-2021, 02:36 PM)Aztec2012 Wrote: [ -> ]How to unlock Bare Knuckles Boxing Pack on RPCS3? All other works.
I know this is pretty old. But some how I got bare knuckle to show up on my RPCS3. Not sure how.
https://imgur.com/a/S6cFUt8
Apparently the bare knuckle mode works with RPCS3 0.0.27-14821. Not sure about the other versions.
FIGHT NIGHT CHAMPION [BLUS30608] 1.02v
DLC is working now and no more crash.
This game runs almost perfect for me, finished game in Hardest difficult, I noticed 2 problems here:
Rare audio stuttering in knockout replay
Cutscene flickering - Can improve 90% if Enable "Allow Host GPU Labels" in Advanced tab
OBS: Setting "Preferred SPU Threads" to 2 lowered my CPU usage by 30% with no FPS loss.
I unlocked hidden boxers with cheat engine.
- SYS: RPCS3 v0.0.27-15080-9f5e3ecb Alpha | master
- SYS: AMD Ryzen 5 2600 Six-Core Processor | 12 Threads | 15.92 GiB RAM | TSC: 4.092GHz | AVX+ | FMA3
- SYS: Operating system: Windows, Major: 10, Minor: 0, Build: 19045, Service Pack: none, Compatibility mode: 0
- SYS: Current Time: 2023-05-28T02:35:28
- RSX: Found vulkan-compatible GPU: 'AMD Radeon RX 6600M' running on driver 2.0.262
- SYS: Firmware version: 4.90
Runs flawlessly for me on latest RPCS3
Running - RPCS3 Version: 0.0.27-15096-bbbc5f6e Alpha | master
CPU - 12-Core AMD Ryzen 9 5900X, 4675 MHz (46.75 x 100)
GPU - Gigabyte GeForce GTX 1080 Ti
It's a pitty that Fight Night Champion since years is almost unplayable
The game freezes in almost every second match
Game game freezes with the following error:
F {PPU[0x1000005] Thread (/dev_hdd0) [0x004a54f0]} VM: Access violation writing location 0x0 (unmapped memory)
This error always occurs in a KO sequence
There is also a bug report on github:
https://github.com/RPCS3/rpcs3/issues/6976
(05-28-2023, 03:50 AM)FrostyPS3 Wrote: [ -> ]FIGHT NIGHT CHAMPION [BLUS30608] 1.02v
DLC is working now and no more crash.
This game runs almost perfect for me, finished game in Hardest difficult, I noticed 2 problems here:
Rare audio stuttering in knockout replay
Cutscene flickering - Can improve 90% if Enable "Allow Host GPU Labels" in Advanced tab
OBS: Setting "Preferred SPU Threads" to 2 lowered my CPU usage by 30% with no FPS loss.
I unlocked hidden boxers with cheat engine.
- SYS: RPCS3 v0.0.27-15080-9f5e3ecb Alpha | master
- SYS: AMD Ryzen 5 2600 Six-Core Processor | 12 Threads | 15.92 GiB RAM | TSC: 4.092GHz | AVX+ | FMA3
- SYS: Operating system: Windows, Major: 10, Minor: 0, Build: 19045, Service Pack: none, Compatibility mode: 0
- SYS: Current Time: 2023-05-28T02:35:28
- RSX: Found vulkan-compatible GPU: 'AMD Radeon RX 6600M' running on driver 2.0.262
- SYS: Firmware version: 4.90
Could you please show me how to use cheat engine to unlock the hidden boxers?
@shagalagz We have found out another, better method, cheat engine is weak! PM me and i will send you all the informations
(03-21-2023, 06:11 AM)Twurtleee Wrote: [ -> ] (03-19-2023, 05:08 AM)PhenomKing Wrote: [ -> ] (09-07-2021, 02:36 PM)Aztec2012 Wrote: [ -> ]How to unlock Bare Knuckles Boxing Pack on RPCS3? All other works.
I know this is pretty old. But some how I got bare knuckle to show up on my RPCS3. Not sure how.
So there is a way to get bare knuckles to work as well as all the fighter DLCs which I was able to figure out. I tried making a post about this which had a video linked I made explaining how to get it all to work but because my tutorial had the link for the files it couldn’t be posted :/ so I’m going to try making a new one without linking anything to hopefully help out, I’ve worked for quite a while with this game to finally get it all to work right so I hope I can figure out how to help everyone with this.
For now here are the steps to do so if you can follow along and have the DLC pkg files needed in order to use bare knuckles and unlock all the fighters.
Important things to note first, I am on firmware 4.88 if it makes a difference, and a fresh install of RPCS3.
1. Install FNC to RPCS3
2. Launch first time and let it run until it does its first steps and takes you to the start menu
3. Close out and install 1.02 update.
4. Re-Launch and start the game and then close at any point once the champion mode prison match starts.
5. Install the bare knuckles and fighters pkg files.
6. Right click on the game and open the option for “patches” or something along those lines, when it opens and pops up with the patch update box press ok, then press apply and close the window
7. Start the game again and you should now have the bare knuckle and fighters all there to use
There is an updated video on my youtube, the old one is still up but the updated one is for the current version of RPCS3. Bare knuckles still works as it should with my tutorial. There are a few tips and bits of info towards the end explaining some of the settings for people with lower end pc's trying to get the game to work. You can find the video on my youtube which is the same as my profile name here.
Hi I just have a question about the legacy boost. do you guys have any way of unlocking it? like for example for the gold speed boost, the requirements are " Reach Boxer Level 45 with your created boxer in online world championships to unlock or purchase from the Fight Night Store".