RPCS3 Forums

@hecta it wasn't in playable because we needed a proper compatability test that met the guidelines: https://forums.rpcs3.net/thread-196671.html since your post met the guidelines the thread has now been moved.

(12-03-2017, 07:24 AM)djsave Wrote: [ -> ]Hello everyone

When running the games (both first and second part) all works perfectly but game freezes in the beginning right after you jump down on ship and open the first chest
here is the latest error in Log:
E {rsx::thread} RSX: Invalid RSX method 0x4 (arg=0x60a1fffc)
(in file Emu\RSX\rsx_methods.cpp:45)
E {rsx::thread} RSX: Invalid RSX method 0xc0 (arg=0x60411f9c)
(in file Emu\RSX\rsx_methods.cpp:45)

My specs: Ryzen 7  1700x , GTX 1080, 16 GB RAM

I'm trying with recommended settings with latest build downloaded today

I get the first of those error codes but it is usually about 10 minutes in.

E {rsx::thread} RSX: Invalid RSX method 0x40c0 (arg=0x6041fffc)

(in file Emu\RSX\rsx_methods.cpp:45)

GTX 1080ti
I7-7700k

Getting a crash in the Thesius boss fight; tested in both this title ID and NPEA00256. The error reads differently here though, and it looks like this:

---

(12-04-2017, 10:46 PM)dontpokethebear3893 Wrote: [ -> ]Getting a crash in the Thesius boss fight; tested in both this title ID and NPEA00256. The error reads differently here though, and it looks like this:

Code:

E {rsx::thread} RSX: Invalid RSX method 0xffa0 (arg=0x9c6d)
(in file Emu\RSX\rsx_methods.cpp:45)
E {rsx::thread} RSX: Invalid RSX method 0x808 (arg=0x106c083)
(in file Emu\RSX\rsx_methods.cpp:45)
E {rsx::thread} RSX: Invalid RSX method 0x4000 (arg=0x106c0c3)
(in file Emu\RSX\rsx_methods.cpp:45)
E {rsx::thread} HLE: Getting the real address failed. (addr=0x403da378)
E {rsx::thread} RSX: Invalid FIFO queue get/put registers found, get=0x403DA378, put=0x24F34
E {rsx::thread} HLE: Getting the real address failed. (addr=0x403da378)
E {rsx::thread} RSX: Invalid FIFO queue get/put registers found, get=0x403DA378, put=0x24F34
E {rsx::thread} HLE: Getting the real address failed. (addr=0x403da378)
E {rsx::thread} RSX: Invalid FIFO queue get/put registers found, get=0x403DA378, put=0x24F34
E {rsx::thread} HLE: Getting the real address failed. (addr=0x403da378)
E {rsx::thread} RSX: Invalid FIFO queue get/put registers found, get=0x403DA378, put=0x24F34
E {rsx::thread} RSX: Application has failed to recover, discarding FIFO queue

I'm attaching my save file here so anyone can load it up for themselves

I have white screen when i start game.

What are your settings? Mine look like this
[attachment=2788]
[attachment=2789]

I tried your settings but still doesn't work. Only white screen.

RPCS3 v0.0.4-6207-970d2a06 Alpha | HEAD
Intel® Core™ i5-4670K CPU @ 3.40GHz | 4 Threads | 7.87 GiB RAM | AVX+

Removed log console output spam

Hello, you have to test the game from a virtual drive and the problem disappears. regards

[attachment=2792]

Hello:

I'm getting the exact same error as the user "Snatch" a few posts above, in fact I run into it several times before on older builds but I thought the game wasn't fully compatible yet.
Usually I boot the game (GoW1 or GoW2) and after a second or two it freezes with this error.
This happens on default settings on Vulkan, if I switch to OpenGL the game works perfectly but it's pretty slow (between 10-30fps)
If I switch "Frame Limiter" to "Auto", the game doesn't give me this error in the menu, but if I try to start a new game it freezes on the cinematic or if I try to load a saved game it gives me the same error.
For some reason I read someone enabling "Write Color Buffers", if I enable it, the game runs fine on Vulkan, no hangs no crashes but the frame rate is even lower than OpenGL
I tried playing around with settings, resolution, reinstalling things, everything short of a full system reinstall, that is the only thing I can think of now.
I don't know much about this so I'm hoping someone could tell me what I have wrong or send me in the right direction.
Here are my system specs (just in case):

AMD FX-8350
GTX 970 (EVGA Overclocked)
16GB RAM

pS: Also, after several boots of the game, and switching settings, at some point it started giving me a white screen on boot (I read it's related to pirated copies? Mine is self-dumped from disc). Hitting "Resume" on emulation gets past it, it seems related to the audio somehow, because after that the audio disappeared in game while running on Vulkan (it's in the log).

Here is the last lines of the log (in case is enough) because the log is kinda big (but I attached it too, just in case, it's compressed, if you need it without compression I can upload it too):

·! 0:00:33.624514 {SPU[0x2000003] Thread (BP_RenFragCellSpursKernel0)} SPU: Function detected [0x0f5b8-0x0f600] (size=0x48)
·E 0:00:33.737240 {rsx::thread} RSX: Invalid RSX method 0x4 (arg=0x0)
(in file Emu\RSX\rsx_methods.cpp:45)
·E 0:00:33.737254 {rsx::thread} HLE: Getting the real address failed. (addr=0x36663664)
·E 0:00:33.737257 {rsx::thread} RSX: Invalid FIFO queue get/put registers found, get=0x36663664, put=0xC7F1C
·E 0:00:33.739109 {rsx::thread} HLE: Getting the real address failed. (addr=0x36663664)
·E 0:00:33.739119 {rsx::thread} RSX: Invalid FIFO queue get/put registers found, get=0x36663664, put=0xC7F1C
·E 0:00:33.740609 {rsx::thread} HLE: Getting the real address failed. (addr=0x36663664)
·E 0:00:33.740620 {rsx::thread} RSX: Invalid FIFO queue get/put registers found, get=0x36663664, put=0xC7F1C
·E 0:00:33.742610 {rsx::thread} HLE: Getting the real address failed. (addr=0x36663664)
·E 0:00:33.742613 {rsx::thread} RSX: Invalid FIFO queue get/put registers found, get=0x36663664, put=0xC7F1C
·E 0:00:33.742616 {rsx::thread} RSX: Application has failed to recover, discarding FIFO queue
·! 0:00:33.804317 {rsx::thread} RSX: VP not found in buffer!
·! 0:00:33.809344 {rsx::thread} RSX: Add program :
·! 0:00:33.809347 {rsx::thread} RSX: *** vp id = 60
·! 0:00:33.809348 {rsx::thread} RSX: *** fp id = 3
·S 0:00:34.229429 {rsx::thread} RSX: New program compiled successfully
·! 0:00:34.504017 {rsx::thread} RSX: VP not found in buffer!
·E 0:00:34.504058 {rsx::thread} RSX: dst index out of range: 25
·E 0:00:34.548852 {rsx::thread} RSX: ERROR: 0:220: 'dst_reg25' : undeclared identifier
ERROR: 0:220: '' : compilation terminated
ERROR: 2 compilation errors.  No code generated.

Although my God of War 1 crashes constantly, often in the character upgrade menu, God of War 2 seems fine.

OpenGL also seems to be more stable, although frame rate is too low, and seems to cause other issues, e.g. enemy archers don't fire arrows on the part where you have to push the crate.

I'm also getting white screen (both GoW 1 and 2) with "F {PPU[0x1000000] Thread (main_thread) [0x00313b0c]} MEM: Access violation reading location 0x4" error. Tried master, zangetsu build, none of them seems to be working.