(04-13-2020, 10:16 PM)hecta Wrote: [ -> ]I can confirm that with libsail and libssl I can bypass the Tecmo logo and go to the main menu (after booting it like 5 times), but as soon as I try to start story mode the game crashes, how many times did you have to boot it to actually go ingame?
As observed,
- 1st runner (No shader initiated before), I re-booted 2-3 times to bypass TEMCO Logo. It depends on your harddrive transfer speed.
- 2nd/3rd runner, I re-boot 1-2 times and so on (shader is built already).
For Story-Mode, use
default Res. Scale 100% (720p)
windowed for 1st time. If hang/dark cutscenes, close game window. Re-boot game. story-mode will be rendered correctly. (in your case, repeating process might help)
Hint, Try moving your game & rpcs3 into SSD and re-test the process!!
Almost Playable
Gameplay FPS is stable. Graphic/Cutscenes are well-rendered except some random fog/smoke. Game is more playable after multi-boot.
# Gameplay FPS = (59~60)
# Cutscenes stable (29~30)
# RPCS3 v0.0.9-10256-18219afb Alpha
# Default setting [Res. Scale= 300% Fullscreen 4K]
# Intel i9-9900K @ 3.60GHz | 32GB RAM | 2070S 8GB Nvidia | NVMe storage (3500MB/2500MB Read/Write).
@ Discolor Menu/Gameplay/Cutscenes (Res. Upscaling)
# Enable Stretch To Display Area (GPU)
# Set Res. Scale Threshold = 1024 x 1024 (GPU)
# Enable Read Depth Buffers (Advanced) ==> Fix some random fog/smoke density rendering.
@ Hang/dark at 1st Cutscene ONLY (Res. Upscaling)
# re-boot game [to rebuild compiling shader]
@ IF Blackscreen loading after Temco logo || VM: Access violation writing/reading location (unmapped Memoy)
# Select Load automatic and manual selection (Advanced)
# Enable libsail.sprx (Advanced)
# Enable libssl.sprx (Advanced)
Close game screen [not rpcs3 app], repeat booting game until it passes [to rebuild compiling shader].
Almost Playable
Beaten the game from start to finished with freezing issue at loading some cutscenes. Gameplay FPS is stable. Graphic/Cutscenes are well-rendered including fog/smoke/other effects. Sound/Effects are clearly working.
# Gameplay FPS = (59~60)
# Cutscenes stable (29~30)
# RPCS3 v0.0.10-10494-e485c9c7 Alpha
# Default setting [Res. Scale= 300% Fullscreen 4K]
# Intel i9-9900K @ 3.60GHz | 32GB RAM | 2070S 8GB Nvidia | NVMe storage (3500MB/2500MB Read/Write).
Discolor Cutscenes (Res. Upscaling)
# Enable Stretch To Display Area (GPU)
# Set Res. Scale Threshold = 1024 x 1024 (GPU)
@ IF Freezing at ending movie of Day2,5,7 only (Res. Upscaling)
(main_thread/) [0x0324c3c0]} VM: Access violation reading location 0x38 (unmapped memory)
# Disable SPU Cache (CPU)
# Close game screen [not rpcs3 app], re-booting game
@ IF Blackscreen loading after Temco logo (unable to load Team Ninja video)
(_libsail-control) [0x032880a8]} VM: Access violation writing location 0x0 (read-only memory)
# Remove Shaders Cache
# Close game screen [not rpcs3 app], re-booting game
(06-13-2020, 11:35 PM)quick.sliver1 Wrote: [ -> ]Almost Playable
Beaten the game from start to finished with freezing issue at loading some cutscenes. Gameplay FPS is stable. Graphic/Cutscenes are well-rendered including fog/smoke/other effects. Sound/Effects are clearly working.
# Gameplay FPS = (59~60)
# Cutscenes stable (29~30)
# RPCS3 v0.0.10-10494-e485c9c7 Alpha
# Default setting [Res. Scale= 300% Fullscreen 4K]
# Intel i9-9900K @ 3.60GHz | 32GB RAM | 2070S 8GB Nvidia | NVMe storage (3500MB/2500MB Read/Write).
Discolor Cutscenes (Res. Upscaling)
# Enable Stretch To Display Area (GPU)
# Set Res. Scale Threshold = 1024 x 1024 (GPU)
@ IF Freezing at ending movie of Day2,5,7 only (Res. Upscaling)
(main_thread/) [0x0324c3c0]} VM: Access violation reading location 0x38 (unmapped memory)
# Disable SPU Cache (CPU)
# Close game screen [not rpcs3 app], re-booting game
@ IF Blackscreen loading after Temco logo (unable to load Team Ninja video)
(_libsail-control) [0x032880a8]} VM: Access violation writing location 0x0 (read-only memory)
# Remove Shaders Cache
# Close game screen [not rpcs3 app], re-booting game
hi, can you screen your settings pls? my game freeze after 1st cutscene
far from playable too for me, i tried like 10 time, it crash else on logo cinematic else on 1st game cinematic
(07-09-2020, 05:09 PM)Dudebanani Wrote: [ -> ]hi, can you screen your settings pls? my game freeze after 1st cutscene
Setting is attached.
# Close game screen [not rpcs3 app], re-booting game
1st run black screen
2nd run discolor screen
3rd run correct color screen!!
(07-23-2020, 12:28 PM)quick.sliver1 Wrote: [ -> ] (07-09-2020, 05:09 PM)Dudebanani Wrote: [ -> ]hi, can you screen your settings pls? my game freeze after 1st cutscene
Setting is attached.
# Close game screen [not rpcs3 app], re-booting game
1st run black screen
2nd run discolor screen
3rd run correct color screen!!
When I try to run the game with these settings my whole RPCS3 crashes and says "bad magic"?
I have the problem where there's a black screen after the koei opening
0.0.12.10848, i9-10900k, 1080Ti
Able to run it at steady 60fps at 4K. But to get resolution scaling working properly, on GPU tab, change "Resolution Scaling Threshold" all the way to 1024, and check "Stretch to Display Area".
Without changing "Resolution Scaling Threshold", everything turned pink when it's not 100% resolution; Without "Stretch to Display Area", images are squeezed to 1/3 of the screen height(at 4K, 300% resolution)
See my full config at
https://youtu.be/R2_QUwNS-xs
And tested on my other older PC, with i5-3570 and 1660 Super, it does stuck at a black screen after the first logo screen when I change the “Resolution Scaling Threshold” to any value other than the default 16x16. But still able to get in game with default resolution.
You launch not RE edition)) btw for me game run very good but i have 50/50 chance to game crush after scenes(cutscenes) change.
(06-13-2020, 11:35 PM)quick.sliver1 Wrote: [ -> ]Almost Playable
Beaten the game from start to finished with freezing issue at loading some cutscenes. Gameplay FPS is stable. Graphic/Cutscenes are well-rendered including fog/smoke/other effects. Sound/Effects are clearly working.
# Gameplay FPS = (59~60)
# Cutscenes stable (29~30)
# RPCS3 v0.0.10-10494-e485c9c7 Alpha
# Default setting [Res. Scale= 300% Fullscreen 4K]
# Intel i9-9900K @ 3.60GHz | 32GB RAM | 2070S 8GB Nvidia | NVMe storage (3500MB/2500MB Read/Write).
Discolor Cutscenes (Res. Upscaling)
# Enable Stretch To Display Area (GPU)
# Set Res. Scale Threshold = 1024 x 1024 (GPU)
@ IF Freezing at ending movie of Day2,5,7 only (Res. Upscaling)
(main_thread/) [0x0324c3c0]} VM: Access violation reading location 0x38 (unmapped memory)
# Disable SPU Cache (CPU)
# Close game screen [not rpcs3 app], re-booting game
@ IF Blackscreen loading after Temco logo (unable to load Team Ninja video)
(_libsail-control) [0x032880a8]} VM: Access violation writing location 0x0 (read-only memory)
# Remove Shaders Cache
# Close game screen [not rpcs3 app], re-booting game
Why are you recommending people use stretch to display area? All that does is stretch the image, which is obviously awful.
Also, 1024x1024 scale threshold will make resolution scaling look worse. Only 580x580 is needed for this game.
(09-08-2020, 08:33 PM)ldczzyy Wrote: [ -> ]Without changing "Resolution Scaling Threshold", everything turned pink when it's not 100% resolution; Without "Stretch to Display Area", images are squeezed to 1/3 of the screen height(at 4K, 300% resolution)
See my full config at https://youtu.be/R2_QUwNS-xs
Only 580x580 threshold is required. The higher you go the worse resolution scaling looks. Don't increase it too much. The game has an inbuilt 60fps frame-limiter, you don't need to use RPCS3's frame-limiter as it will just reduce performance slightly. Stretch to Display Area is not needed, and will only make it look horrible on non 16:9 monitors / when windowed with different aspect ratio's