DAYTONA USA [NPUB30493]
Started by AAKH1361




43 posts in this topic
digo
Member


0
22 posts 0 threads Joined: Sep 2020
02-05-2021, 07:56 PM -
#11
Just for the sake of sanity check, I just tested today with a fresh install of the rpcs3 emulator, fresh installed Nvidia driver version 460.89 DCH (it's the regular driver, no need to use vulkan beta driver). Same exact settings for the emulator as shown on the previous video I recorded above. Daytona USA version NPUB30493. Same PC configuration. RPCS3 v0.0.14-11690-28658653 Alpha (todays latest version as at the time of this post).

Result: it runs flawlessly with no issues whatsoever. No texture corruption, no flickering, nothing wrong. The only differences is that I ran without freesync this time and I also installed the latest PS3 firmware version 4.87, but it both doesnt matters for the test anyway.

So yes, it's working with full LLVM support. If it's not working for you, try a clean install of RPCS3 emulator and GPU driver before posting here, and use the same settings as the ones shown in the video. if you use AMD GPU for rendering the game, that possibly could be the problem though. I didn't bother to test using my RX550 for this.
Tomcat
Member


0
4 posts 1 threads Joined: Feb 2021
02-06-2021, 08:32 AM -
#12
Just wanted to add that the this version works perfectly, iv done a few races this my old, and only, computer  Undecided with the ps4 game pad

Intel® Core™ i5 CPU 750 @ 2.67GHz | 4 Threads | 8.00 GiB RAM | TSC: 2.665GHz



However as digo said, you need to download the latest gpu drivers from nvidia



461.40-desktop-win10-64bit-international-whql.exe


There seems to bee some error in the log, but  doesn't seem to affect the game.

Cheers!
Ani
Administrator
*******


16
4,386 posts 106 threads Joined: Aug 2017
02-06-2021, 03:53 PM -
#13
Missing log file, you uploaded something that wasn't the log file
    Desktop: Ryzen 7 5800X,   Radeon RX 6800 XT, 2x8G DDR4 3600MHz, Manjaro Linux
     Laptop: Ryzen 9 5900HX,  Radeon RX 6700M,   2x8G DDR4 3200MHz, Manjaro Linux
Old Desktop: AMD FX-8350,     Radeon R9 280X,    2x4G DDR3 1600MHz, Manjaro Linux
nandru
Member


0
14 posts 0 threads Joined: Dec 2019
02-06-2021, 11:26 PM -
#14
Still borked.

What I tried:
Fresh RPCS3 install.
Fresh nvidia drivers, with clean installation
Downloaded game from a web source instead of my dump (in case it was a bad dump)
Default settings on rcps3.

With all that, still shows garbled graphics.


RPCS3 v0.0.14-11698-fad89f1c Alpha | HEAD | Firmware version: 4.87
AMD Ryzen 5 2600 Six-Core Processor | 12 Threads | 15.95 GiB RAM | TSC: 3.394GHz | AVX+ | FMA3
Operating system: Windows, Major: 10, Minor: 0, Build: 19041, Service Pack: none, Compatibility mode: 0
RSX: Found vulkan-compatible GPU: 'GeForce GTX 1660 SUPER' running on driver 461.40.0.0



Im guessing its something to do with either my CPU or Windows version (2004, still doesn't download 20H2). Or both
Tomcat
Member


0
4 posts 1 threads Joined: Feb 2021
02-07-2021, 10:04 AM -
#15
(02-06-2021, 03:53 PM)Ani Wrote: Missing log file, you uploaded something that wasn't the log file

oops, there we go.



RPCS3 v0.0.14-11702-0057c89e Alpha | HEAD | Firmware version: 4.87
Intel® Core™ i5 CPU 750 @ 2.67GHz | 4 Threads | 8.00 GiB RAM | TSC: 2.665GHz

Operating system: Windows, Major: 10, Minor: 0, Build: 16299, Service Pack: none, Compatibility mode: 0
RSX: Found vulkan-compatible GPU: 'GeForce GTX 660' running on driver 461.40.0.0

(02-06-2021, 11:26 PM)nandru Wrote: Still borked.

What I tried:
Fresh RPCS3 install.
Fresh nvidia drivers, with clean installation
Downloaded game from a web source instead of my dump (in case it was a bad dump)
Default settings on rcps3.

With all that, still shows garbled graphics.


RPCS3 v0.0.14-11698-fad89f1c Alpha | HEAD | Firmware version: 4.87
AMD Ryzen 5 2600 Six-Core Processor | 12 Threads | 15.95 GiB RAM | TSC: 3.394GHz | AVX+ | FMA3
Operating system: Windows, Major: 10, Minor: 0, Build: 19041, Service Pack: none, Compatibility mode: 0
RSX: Found vulkan-compatible GPU: 'GeForce GTX 1660 SUPER' running on driver 461.40.0.0



Im guessing its something to do with either my CPU or Windows version (2004, still doesn't download 20H2). Or both


Did you restart pc or close user session. If I dont do this i was noticing a few things

1. A frame drop (from 60 to 40) and lag during racing (probably my slow computer)
2. At a certain part of the circuit (passing by the start) i always get a frame drop (down to 40 fps for 1 second), however if iv launched rpsc3 just after a close session its hardly worth mentioning

Your pc should pulverize mine, mind you i think this is the only game i can play Sad

cheers!
This post was last modified: 02-07-2021, 12:14 PM by Ani.
Ani
Administrator
*******


16
4,386 posts 106 threads Joined: Aug 2017
02-07-2021, 12:14 PM -
#16
You still didn't upload log file, you uploaded some copy paste into a .txt file
Log file is RPCS3.log
    Desktop: Ryzen 7 5800X,   Radeon RX 6800 XT, 2x8G DDR4 3600MHz, Manjaro Linux
     Laptop: Ryzen 9 5900HX,  Radeon RX 6700M,   2x8G DDR4 3200MHz, Manjaro Linux
Old Desktop: AMD FX-8350,     Radeon R9 280X,    2x4G DDR3 1600MHz, Manjaro Linux
Tomcat
Member


0
4 posts 1 threads Joined: Feb 2021
02-07-2021, 01:34 PM -
#17
(02-07-2021, 12:14 PM)Ani Wrote: You still didn't upload log file, you uploaded some copy paste into a .txt file
Log file is RPCS3.log

ah directly from RPCS3.log

Cheers


Attached Files
.gz   RPCS3.zip.gz (Size: 97.22 KB / Downloads: 4)
nandru
Member


0
14 posts 0 threads Joined: Dec 2019
02-07-2021, 02:47 PM -
#18
(02-07-2021, 10:04 AM)Tomcat Wrote: Did you restart pc or close user session. If I dont do this i was noticing a few things

1. A frame drop (from 60 to 40) and lag during racing (probably my slow computer)
2. At a certain part of the circuit (passing by the start) i always get a frame drop (down to 40 fps for 1 second), however if iv launched rpsc3 just after a close session its hardly worth mentioning

Your pc should pulverize mine, mind you i think this is the only game i can play Sad

cheers!

Yep. The issue isnt frame drops, is that graphis are still all over the place ingame with LLVM PPU Recompiler. One thing I could try is booting linux and see if there are corrupted there... Will do and report back!


EDIT: Nope. Linux is also affected.

RPCS3 v0.0.14-11706-44ab5055 Alpha | HEAD | Firmware version: 4.87
AMD Ryzen 5 2600 Six-Core Processor | 12 Threads | 15.65 GiB RAM | TSC: 3.394GHz | AVX+ | FMA3
Operating system: POSIX, Name: Linux, Release: 5.4.0-65-generic, Version: #73-Ubuntu SMP Mon Jan 18 17:25:17 UTC 2021
RSX: Found vulkan-compatible GPU: 'GeForce GTX 1660 SUPER' running on driver 460.39.0.0
This post was last modified: 02-07-2021, 11:41 PM by nandru. Edit Reason: Add linux test results
RetroPC
Member


0
2 posts 0 threads Joined: Nov 2020
02-20-2021, 03:31 AM -
#19
I can confirm: Daytona USA (NPUB30493 & NPEB00630) is broken using the PPU "Recompiler LLVM", only is playable on "Interpreter", but is slow!

RPCS3 Version:
rpcs3-v0.0.14-11767-b86ec2ff _win64

Game:
DAYTONA USA [NPUB30493]
DAYTONA USA [NPEB00630]

Status:
Ingame.


Config default:
https://www.youtube.com/watch?v=tra8sacw6rA

Saludos!
This post was last modified: 02-24-2021, 09:13 PM by RetroPC. Edit Reason: mor info added!


Attached Files
.gz   RPCS3.log.gz (Size: 96.83 KB / Downloads: 1)
Mock
Member


0
36 posts 1 threads Joined: Jan 2021
07-20-2021, 10:24 PM -
#20
(02-07-2021, 01:34 PM)Tomcat Wrote:
(02-07-2021, 12:14 PM)Ani Wrote: You still didn't upload log file, you uploaded some copy paste into a .txt file
Log file is RPCS3.log

ah directly from RPCS3.log

Cheers

I have been viewing one of the other daytona threads, but here is my log, have tried almost every version released and still has texture issues with LVM, still i have a very old modified release that works.

Have done clean install of nvidia drivers, and cleared all cache, and tested with a lot of different settings to see if it changed anything


Attached Files
.gz   RPCS3.log.gz (Size: 108.6 KB / Downloads: 0)


Forum Jump:


Users browsing this thread: 2 Guest(s)