Ninja Gaiden 3: Razor's Edge [BLJM61010]

RPCS3 v0.0.2-6-8e64e9d Alpha
White screen only.

I got to the intro,Can't pass the save screen.
Please move to Intro.

Use this custom build: https://rpcs3.net/blog/wp-content/upload...eduler3.7z

Log attached.
All Errors:

Code:

E {PPU[0x1000000] Thread (main_thread) [0x02c13e58]} 'sys_prx_get_module_id_by_name' failed with 0x8001112e : CELL_PRX_ERROR_UNKNOWN_MODULE x2
E {rsx::thread} RSX: NV3089_IMAGE_IN_SIZE: unknown origin (0)
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b5c3d8]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000000] Thread (main_thread) [0x00b60cbc]} 'sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH
E {SPU[0x2000005] Thread (systemCellSpursKernel0)} SPU: [0x0f7bc] Branch-to-next with $LR
E {SPU[0x2000001] Thread (mainCellSpursKernel1)} SPU: [0x08d7c] Branch-to-next with $LR
E {SPU[0x2000003] Thread (mainCellSpursKernel3)} SPU: [0x08ccc] Branch-to-next with $LR
E {PPU[0x100001a] Thread (_LpcmDecInputThrFunc) [0x031210f4]} 'sys_mutex_unlock' failed with 0x80010009 : CELL_EPERM
E {PPU[0x1000013] Thread (_sys_mixerSurBusReq) [0x00b547c0]} 'sys_mutex_unlock' failed with 0x80010009 : CELL_EPERM
E {PPU[0x1000012] Thread (_sys_MixerChStripMain) [0x00b5a724]} 'sys_mutex_unlock' failed with 0x80010009 : CELL_EPERM
E {PPU[0x1000000] Thread (main_thread) [0x00b55964]} 'sys_event_port_disconnect' failed with 0x80010016 : CELL_ENOTCONN
E {PPU[0x1000000] Thread (main_thread) [0x00a70a8c]} cellSaveData: cellSaveDataEnableOverlay(enable=1)
F {PPU[0x100001d] Thread () [0x00a9bd8c]} MEM: Access violation reading location 0x4c

It's not on a master build, doesn't count for compatibility. Still Nothing.
I issued you a warning because you duplicated the thread. Deleted the other one.

Goes ingame with the zcull_wip branch,
Weird fog follows you in training mode.
In story mode in 3D graphics almost everything is green.

EDIT:
Now working with the master branch.
Tested with 7f4f3a06

None of those is a master build, still Nothing

RPCS3 v0.0.4-6091-c5873880 Alpha | HEAD
Black screen only after intro logos.

Euro version ingame.

Euro version ingame.

Nop.. Euro ver. also black screen with freeze fps after Tecmo Logo ((

Ingame
Gameplay FPS is stable.  Game is playable after multi-boot:

• Bypass TEMCO logo (No Blackscreen)
  
• Correct cutscenes rendering (No dark/discolor cutscenes)
  
• Correct gameplay rendering (No discolor gameplay)
  

Res. upscaling causes discolored in cutscenes/gameplay.  Enable Write Color Buffers (GPU) does nothing
 
# Gameplay FPS = (59~60)
# Cutscenes stable (29~30)
# RPCS3 v0.0.9-10156-e8f9fd54 Alpha
# Default setting
# Intel i9-9900K @ 3.60GHz | 32GB RAM | 2070S 8GB Nvidia | NVMe storage (3500MB/2500MB Read/Write).
 
 
@ IF Blackscreen loading after Temco logo || VM: Access violation writing/reading location (unmapped Memoy)
# Select Load automatic and manual selection (Advanced)
                # Enable libsail.sprx (Advanced)                                                             
                # Enable libssl.sprx (Advanced)
Close game screen [not rpcs3 app], re-boot game until it passes.

Ingame
Gameplay FPS is stable.  Game is playable after multi-boot:

• Bypass TEMCO logo (No Blackscreen)
  
• Correct cutscenes rendering (No dark/discolor cutscenes)
  
• Correct gameplay rendering (No discolor gameplay)
  

Res. upscaling causes discolored in cutscenes/gameplay.  Enable Write Color Buffers (GPU) does nothing
 
# Gameplay FPS = (59~60)
# Cutscenes stable (29~30)
# RPCS3 v0.0.9-10156-e8f9fd54 Alpha
# Default setting
# Intel i9-9900K @ 3.60GHz | 32GB RAM | 2070S 8GB Nvidia | NVMe storage (3500MB/2500MB Read/Write).
 
 
@ IF Blackscreen loading after Temco logo || VM: Access violation writing/reading location (unmapped Memoy)
# Select Load automatic and manual selection (Advanced)
                # Enable libsail.sprx (Advanced)                                                             
                # Enable libssl.sprx (Advanced)
Close game screen [not rpcs3 app], re-boot game until it passes.

I can confirm that with libsail and libssl I can bypass the Tecmo logo and go to the main menu (after booting it like 5 times), but as soon as I try to start story mode the game crashes, how many times did you have to boot it to actually go ingame?