Demon's Souls [BLES00932]
Started by ssshadow




329 posts in this topic
Smigi
Member


0
4 posts 0 threads Joined: Oct 2018
10-23-2018, 06:38 PM -
(10-23-2018, 09:14 AM)Asinine Wrote: Well without knowing what settings you're using it's hard to know if you have bad settings... but just make sure you're using Vulkan (if your gpu supports it) 1280x720 resolution (use resolution SCALING to increase resolution instead) and use PPU + SPU LLVM

Thank you for your reply, I'm not sure if i have correct settings soo here's snap of my settings rpcs3 for demon souls. 

Kind Regards Smigi


Attached Files Thumbnail(s)
       
TrF
Member


0
3 posts 1 threads Joined: Oct 2018
10-23-2018, 09:30 PM -
Hello there!

So i just gonna join the train of newbies asking how to get this to work properly. (sorry for this)

I installed today and try to get it work now for almost 3-4 hours trail n error but not a rly satisfying experience...

Sound is Stuttering weirdly and anymations run asynchronus it feels like the game is running with lower fps than it shows or it is micro lag some how...

My Specs are: 
AMD FX-8350 at 4 GHz (Utilisation running at 70% when rpcs3 is running)
16 GB RAM (rpsxc3 only uses 2,5 gb)
MSI GTX 1060 6GB (30% usage with tpsc3)

settings :
   

it should be an issu with the settings or is my cpu rly the bottleneck here?

thx in advance !!!
Ani
Administrator
*******


16
4,386 posts 106 threads Joined: Aug 2017
10-23-2018, 10:16 PM -
Your CPU is too weak, at least overclock it, FX8350 at less than 4.5 is a waste of CPU.
    Desktop: Ryzen 7 5800X,   Radeon RX 6800 XT, 2x8G DDR4 3600MHz, Manjaro Linux
     Laptop: Ryzen 9 5900HX,  Radeon RX 6700M,   2x8G DDR4 3200MHz, Manjaro Linux
Old Desktop: AMD FX-8350,     Radeon R9 280X,    2x4G DDR3 1600MHz, Manjaro Linux
Asinine
Moderator
*****


4
2,060 posts 83 threads Joined: Aug 2017
10-24-2018, 04:06 AM -
Disable framelimiter, Demon's Souls has a 30fps cap inbuilt, if you use RPCS3's framelimiter on-top you're just hurting performance for no reason. Also I would just use "Auto" for the "Preferred SPU threads" option and as i said before use SPU LLVM Recompiler. Turn GPU texture scaling off too. But, as Ani said, a FX8350 is quite weak.
Smigi
Member


0
4 posts 0 threads Joined: Oct 2018
10-24-2018, 07:02 PM -
(10-24-2018, 04:06 AM)Asinine Wrote: Disable framelimiter, Demon's Souls has a 30fps cap inbuilt, if you use RPCS3's framelimiter on-top you're just hurting performance for no reason. Also I would just use "Auto" for the "Preferred SPU threads" option and as i said before use SPU LLVM Recompiler. Turn GPU texture scaling off too. But, as Ani said, a FX8350 is quite weak.

Hello Asinine ,

I did as you said and changed the config , still tought no impact . When I spawn outside the Boletarian Palace and look at the gate ,FPS drop to ground. Only here, whole tutorial map was fine without any performance drop. Maybe smth other is wrong. Belowe I past log from that short time session when i load the game in mentioned location: 

E {PPU[0x1000003] Thread (DLSpursManagerSpursHdlr1) [0x01deb604]} 'sys_event_queue_receive' failed with 0x00000000 : 0 [1]
E {PPU[0x1000006] Thread (_gcm_intr_thread) [0x01dc833c]} 'sys_event_queue_receive' failed with 0x00000000 : 0 [1]
E {PPU[0x1000001] Thread ((Dantelion2)PPURuntimeService) [0x00b5d908]} 'sys_timer_usleep' failed with 0x00000000 : 0 [1]
E {PPU[0x1000008] Thread (Core.Res.Decompressor) [0x009e03f8]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000007] Thread (HG_Watchdog) [0x00b5d908]} 'sys_timer_usleep' failed with 0x00000000 : 0 [1]
E {PPU[0x100000b] Thread (Core.Res.TaskManager) [0x009e03f8]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000009] Thread (Core.Res.CacheDeviceHandler) [0x009e03f8]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x100000d] Thread (Havok PPU Thread) [0x015c85e0]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000002] Thread ((Dantelion2)SPURuntimeService) [0x00c5dae8]} 'sys_event_queue_receive' failed with 0x00000000 : 0 [1]
E {PPU[0x100000a] Thread (Core.Res.FileLoader) [0x009e03f8]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000010] Thread (spu_printf_handler) [0x0154f890]} 'sys_event_queue_receive' failed with 0x00000000 : 0 [1]
E {PPU[0x100000f] Thread (MOMixerThread) [0x01543480]} 'sys_event_queue_receive' failed with 0x00000000 : 0 [1]
E {PPU[0x1000011] Thread (_sys_MixerChStripMain) [0x0154cb2c]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x100000c] Thread (hkSpuUtil Helper) [0x010c0d70]} 'sys_event_queue_receive' failed with 0x00000000 : 0 [1]
E {PPU[0x1000011] Thread (_sys_MixerChStripMain)} Stat: '_sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH [x137288]
E {PPU[0x1000013] Thread (_cellsurMixerMain) [0x0154844c]} 'sys_event_queue_receive' failed with 0x00000000 : 0 [1]
E {PPU[0x1000016] Thread (NexusRevolution Surveillance) [0x00b5d908]} 'sys_timer_usleep' failed with 0x00000000 : 0 [1]
E {PPU[0x1000013] Thread (_cellsurMixerMain)} Stat: '_sys_lwmutex_lock' failed with 0x80010005 : CELL_ESRCH [x68644]
E {PPU[0x1000012] Thread (_sys_mixerSurBusReq) [0x01545074]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000013] Thread (_cellsurMixerMain)} Stat: 'sys_mutex_lock' failed with 0x80010008 : CELL_EDEADLK [x17161]
E {PPU[0x1000014] Thread (MOStreamingThread) [0x00b5d908]} 'sys_timer_usleep' failed with 0x00000000 : 0 [1]
E {PPU[0x100001a] Thread (_fs_aio_thread) [0x01e9f17c]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x100001b] Thread (FXHGDrawEntityTracer) [0x009e03f8]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000015] Thread (NexusRevolution Event) [0x00b5d908]} 'sys_timer_usleep' failed with 0x00000000 : 0 [1]
E {PPU[0x100001d] Thread (DsTrophyMan::AsyncUpdateThread) [0x009e03f8]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000019] Thread (SLSession) [0x00b0a5e4]} 'sys_semaphore_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x100001c] Thread (FaceGenMan::Thread) [0x009e03f8]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000031] Thread (ChrProxyThreadMan::Thread) [0x009e03f8]} 'sys_cond_wait' failed with 0x00000000 : 0 [1]
E {PPU[0x1000004] Thread (DLSpursManagerSpursHdlr0) [0x01de948c]} 'sys_spu_thread_group_join' failed with 0x00000000 : 0 [1]

Kind Regards Smigi
TrF
Member


0
3 posts 1 threads Joined: Oct 2018
10-24-2018, 10:23 PM -
(10-23-2018, 10:16 PM)Ani Wrote: Your CPU is too weak, at least overclock it, FX8350 at less than 4.5 is a waste of CPU.
i OC'd to 4,8 ghz much smoother experience now Big Grin

but still boletarian palace at avg 25fps and sound bug still happens....


But ive also got a serious question will a i9 9900k perform good with this emulator?

And is it possible to connect to the private online server of demons souls for multiplayer? (even in far future?)
This post was last modified: 10-25-2018, 04:22 PM by TrF.


Attached Files Thumbnail(s)
           
Smigi
Member


0
4 posts 0 threads Joined: Oct 2018
10-25-2018, 06:33 PM -
Hello

Did you manage to find anything in the log ? Or have any other ideas what can casue thaht fps drop in Bolettaria palace ?
Asinine
Moderator
*****


4
2,060 posts 83 threads Joined: Aug 2017
10-27-2018, 01:58 AM -
What you posted isn't a log, it's just a bunch of useless errors. You must attach the full log file if you want help. ( RPCS3.log.gz ), best place to ask for assistance is discord though https://discord.me/RPCS3

@TrF Yes, the 9900k will perform very very well with RPCS3. And as far as multiplayer goes well, i wouldn't hold much hope for it especially when the official servers for DeS were taken offline.
There is an unofficial effort being made to bring the servers back, but no idea if it will ever work with RPCS3.
This post was last modified: 10-27-2018, 02:02 AM by Asinine.
Toriaizu
Member


0
1 posts 0 threads Joined: Jan 2019
01-07-2019, 04:46 PM -
Starting about october, game occasionally crashes and deletes my saves...
Attaching log, can't find, where i done wrong.
This post was last modified: 01-08-2019, 11:36 AM by Toriaizu. Edit Reason: Attachment


Attached Files
.7z   RPCS3.7z (Size: 123.55 KB / Downloads: 5)
PepperPaladin
Member


0
1 posts 0 threads Joined: Jan 2019
01-08-2019, 04:51 PM -
Hey.
CPU E5-2640 +660 + 16
RPCS3 v0.0.5-7678-52ac0a90 Alpha | HEAD
20-25  fps Boletarian Palace. How do i fix this?
       


Forum Jump:


Users browsing this thread: 2 Guest(s)