Dual Shock 2 Wrong Axis

Hi everyone!

I use Dual Shock 2 with a USB adapter.

I set the MMjoystick > MMJoy pad. (RPCS3 v0.0.3-3-8e66e71 Alpha)

When connecting the gamepad, everything works fine, but the right analog axis is misaligned(wrong). How do I set it up properly?

For example,
R-Analog Up -> Left
         Left -> Up
         Down -> Right
         Right -> Down
They are reversing each other.

The select and start buttons have been reversed as well, and this was fixed by adding "config_mmjoystick.yml". Thanks, Ani.

How do I change the setting of the analog axis?

Thank you for your attention.

Hi everyone!

I use Dual Shock 2 with a USB adapter.

I set the MMjoystick > MMJoy pad. (RPCS3 v0.0.3-3-8e66e71 Alpha)

When connecting the gamepad, everything works fine, but the right analog axis is misaligned(wrong). How do I set it up properly?

For example,
R-Analog Up -> Left
         Left -> Up
         Down -> Right
         Right -> Down
They are reversing each other.

The select and start buttons have been reversed as well, and this was fixed by adding "config_mmjoystick.yml". Thanks, Ani.

How do I change the setting of the analog axis?

Thank you for your attention.

having same issue with my hama adapter.
The only solution i find -> using another adapter.
Now with my play+On(found on toy store for 1.99€) all are fine

Hi everyone!

I use Dual Shock 2 with a USB adapter.

I set the MMjoystick > MMJoy pad. (RPCS3 v0.0.3-3-8e66e71 Alpha)

When connecting the gamepad, everything works fine, but the right analog axis is misaligned(wrong). How do I set it up properly?

For example,
R-Analog Up -> Left
         Left -> Up
         Down -> Right
         Right -> Down
They are reversing each other.

The select and start buttons have been reversed as well, and this was fixed by adding "config_mmjoystick.yml". Thanks, Ani.

How do I change the setting of the analog axis?

Thank you for your attention.

having same issue with my hama adapter.
The only solution i find -> using another adapter.
Now with my play+On(found on toy store for 1.99€) all are fine

Does the analog axis work normally when using other adapters ?

I did not think about using another adapter, thank you, Backgamon !