+- RPCS3 Forums (https://forums.rpcs3.net)
+-- Forum: Support & Issues (https://forums.rpcs3.net/forumdisplay.php?fid=17)
+--- Forum: Support (https://forums.rpcs3.net/forumdisplay.php?fid=18)
+--- Thread: Dual Shock 2 Wrong Axis (/showthread.php?tid=197090)
Dual Shock 2 Wrong Axis - HIEVERYONE - 09-23-2017
Hi everyone!
I use Dual Shock 2 with a USB adapter.
I set the MMjoystick > MMJoy pad. (RPCS3 v0.0.3-3-8e66e71 Alpha)
When connecting the gamepad, everything works fine, but the right analog axis is misaligned(wrong). How do I set it up properly?
For example,
R-Analog Up -> Left
Left -> Up
Down -> Right
Right -> Down
They are reversing each other.
The select and start buttons have been reversed as well, and this was fixed by adding "config_mmjoystick.yml". Thanks, Ani.
How do I change the setting of the analog axis?
Thank you for your attention.
RE: Dual Shock 2 Wrong Axis - Backgamon - 09-25-2017
(09-23-2017, 11:17 AM)HIEVERYONE Wrote: Hi everyone!
I use Dual Shock 2 with a USB adapter.
I set the MMjoystick > MMJoy pad. (RPCS3 v0.0.3-3-8e66e71 Alpha)
When connecting the gamepad, everything works fine, but the right analog axis is misaligned(wrong). How do I set it up properly?
For example,
R-Analog Up -> Left
Left -> Up
Down -> Right
Right -> Down
They are reversing each other.
The select and start buttons have been reversed as well, and this was fixed by adding "config_mmjoystick.yml". Thanks, Ani.
How do I change the setting of the analog axis?
Thank you for your attention.
having same issue with my hama adapter.
The only solution i find -> using another adapter.
Now with my play+On(found on toy store for 1.99€) all are fine
RE: Dual Shock 2 Wrong Axis - HIEVERYONE - 09-25-2017
(09-25-2017, 06:47 PM)Backgamon Wrote:(09-23-2017, 11:17 AM)HIEVERYONE Wrote: Hi everyone!
I use Dual Shock 2 with a USB adapter.
I set the MMjoystick > MMJoy pad. (RPCS3 v0.0.3-3-8e66e71 Alpha)
When connecting the gamepad, everything works fine, but the right analog axis is misaligned(wrong). How do I set it up properly?
For example,
R-Analog Up -> Left
Left -> Up
Down -> Right
Right -> Down
They are reversing each other.
The select and start buttons have been reversed as well, and this was fixed by adding "config_mmjoystick.yml". Thanks, Ani.
How do I change the setting of the analog axis?
Thank you for your attention.
having same issue with my hama adapter.
The only solution i find -> using another adapter.
Now with my play+On(found on toy store for 1.99€) all are fine
Does the analog axis work normally when using other adapters ?
I did not think about using another adapter, thank you,
Backgamon !