GrantKaneRock Band 3 [BLUS30463]
Started by GrantKane




33 posts in this topic
Kramerika
Member


0
5 posts 0 threads Joined: Jan 2021
09-06-2021, 12:56 AM -
#31
(03-29-2021, 06:36 PM)Kramerika Wrote: #4  Drums
- Alesis Nitro e-drums connected with Xbox midi pro adapter only work properly if set as Xinput Guitar Hero drums, Rock Band drums and pro drums do not work
- Alesis Nitro e-drums connected with PS3 midi pro adapter only work properly if set as MMJoystick Guitar Hero drums, Rock Band drums and pro drums do not work

I just tested this again.  I can get Pro Drums to work if I set the Xbox 360 midi pro adapter as Xinput with the Drums as Rock Band Pro drums.  However, the yellow and blue cymbals seem to hit the green cymbal at the same time.  The green cymbal works fine on its own.  I can only get the PS3 midi adapter to work with it if I set it to MMJoystick and then Drums and Guitar Hero, but I have to remap drums and can't get pro drums.
Kramerika
Member


0
5 posts 0 threads Joined: Jan 2021
10-09-2021, 12:49 AM -
#32
Does anyone know how to get a PS4 Rock Band guitar to work in RPCS3? I have it working in Windows as a controller with a bluetooth adapter on my PC. It gets recognized as a joystick using MMJoystick. I set it to a Guitar and Rock Band. However, when I try to assign the buttons, it does not work. It sets all buttons to "U-". I tested the guitar in PCSX2 for comparison, and it works fine there to assign the buttons.
yurinator557
RPCS3 Tester


1
122 posts 34 threads Joined: Jul 2019
10-09-2021, 06:23 AM -
#33
(10-09-2021, 12:49 AM)Kramerika Wrote: Does anyone know how to get a PS4 Rock Band guitar to work in RPCS3?  I have it working in Windows as a controller with a bluetooth adapter on my PC.  It gets recognized as a joystick using MMJoystick.  I set it to a Guitar and Rock Band.  However, when I try to assign the buttons, it does not work.  It sets all buttons to "U-".  I tested the guitar in PCSX2 for comparison, and it works fine there to assign the buttons.

Press Filter Noise before trying to bind the buttons
Kramerika
Member


0
5 posts 0 threads Joined: Jan 2021
10-11-2021, 02:28 PM -
#34
Thanks!  That worked.  The only issues now are:

#1  Effects switch does not work
#2  Whammy bar does not work
#3  Tilt does not work, but I can hit the select button to activate overdrive
#4  Is there a way to set a gamepad profile when you are using a custom gamepad configuration for a specific game?  It is grayed out for me.  I can create and set gamepad profiles in the global gamepad settings, but I would like to make these specific to Rock Band since I would rather not have to switch them on an off depending on the game that I am playing.  Basically, if I want to use different device classes across multiple controllers for a game (such as guitar, drums, standard controller), I need to use the profiles, but the game custom gamepad configuration does not allow this from what I can see.  It makes one profile with one device specific to the game which applies to all of the controllers.
This post was last modified: 10-11-2021, 02:31 PM by Kramerika.


Forum Jump:


Users browsing this thread: 1 Guest(s)