Device not mounted error? BLJS10318 - Jojo's Bizarre Adventure Eyes of Heaven

Hi,

Tried to start up the game, but it black-screened with this error:

Code:

E {PPU[0x1000009] Thread (CRI FS File Access 2) [0x01da8c74]} sys_fs: sys_fs_open(“/dev_bdvd/PS3_GAME/USRDIR/data/system/nuccMaterial_ps3.nsh”) failed: device not mounted
E {PPU[0x1000009] Thread (CRI FS File Access 2) [0x01da8c74]} 'cellFsOpen' failed with 0x8001003a : CELL_ENOTMOUNTED

Is this the sort of error that can be fixed by activating/deactivating libs, or is it something more serious?

My log file is here: https://drive.google.com/open?id=0B5j8A_...Gl5MFdGZHc. Let me know if you need any more information.

Your link is 404. Zip and attach the log file on the forums.

Sorry about that. Should be attached to this post.

Don't put a disc game in the hard drive folder. Put the game somewhere else such as on your desktop and use boot game menu to start it.

You didn't load any LLE libraries. Read the quick start guide on rpcs3.net and check which libraries should be loaded in the forum thread for this game.

Don't put a disc game in the hard drive folder. Put the game somewhere else such as on your desktop and use boot game menu to start it.

You didn't load any LLE libraries. Read the quick start guide on rpcs3.net and check which libraries should be loaded in the forum thread for this game.

My mistake on the hard drive folder thing. I must have misread something in the quick start guide.

I definitely loaded the required libraries as mentioned in the quick start guide - I got a white screen instead of a black screen when I tried without the libraries. If you didn't see those... that's pretty concerning, because that means something must not be adding to the log correctly.

Regardless, I added the LLE libraries as specified in this post: http://www.emunewz.net/forum/showthread.php?tid=174644

However, I get the same errors, and am still stuck on a black screen. The thread was last posted in back in July- could it be outdated?

I also found a YouTube video where someone managed to get in-game with the libfiber and libl10n libraries added- but those were duds too, it seems.

In the error messages, I can't see anything that doesn't mention sys- and according to the quick start guide, I shouldn't try to fix those with LLEs.

Any ideas?

My new log file is attached.

Just use this LLE list: http://www.emunewz.net/forum/showthread....#pid245924

But:

·E 0:14:11.490197 {rsx::thread} RSX: OpenGL: initialization of glDepthBoundsEXT failed.
·! 0:14:11.490282 {rsx::thread} RSX: 3.3.0 - Build 20.19.15.4531
·! 0:14:11.490297 {rsx::thread} RSX: 3.30 - Build 20.19.15.4531
·! 0:14:11.490305 {rsx::thread} RSX: Intel

Intel graphics are not working. Maybe you will have more luck with Vulkan or DX12 if your Intel graphics are new enough, but it probably wont work.

Just use this LLE list: http://www.emunewz.net/forum/showthread....#pid245924

But:

·E 0:14:11.490197 {rsx::thread} RSX: OpenGL: initialization of glDepthBoundsEXT failed.
·! 0:14:11.490282 {rsx::thread} RSX: 3.3.0 - Build 20.19.15.4531
·! 0:14:11.490297 {rsx::thread} RSX: 3.30 - Build 20.19.15.4531
·! 0:14:11.490305 {rsx::thread} RSX: Intel

Intel graphics are not working. Maybe you will have more luck with Vulkan or DX12 if your Intel graphics are new enough, but it probably wont work.

Even with all those LLEs, the error persists.

Vulcan and D3D12 settings both crash RPCS3 itself- unless I'm just not waiting long enough.

Is the issue with Intel graphics the game or my computer?

The Intel graphics drivers are not good enough.

The Intel graphics drivers are not good enough.

Is there a way to upgrade my Intel graphics drivers then? My computer is only about a year old...

The Intel graphics drivers are not good enough.

Is there a way to upgrade my Intel graphics drivers then? My computer is only about a year old...

Maybe this: https://downloadcenter.intel.com/downloa...duct=98910

Otherwise just search on the site.