Hello There, Guest! Register

Naruto Shippuden: Ultimate Ninja Storm 2 [NPJB90253]
#11
I have issued you a minor warning for posting results with non-master build.
Reply
#12
Build : [efc87792] RPCS3 0.0.0.9

[Image: t2675467_ggggg.png]

Log (40MB->600Kb): https://mega.nz/#!8AgHnCyR!2xyE4R525BtKh...trQh0XKNO4
SPUJIT (40MB->4MB) : https://mega.nz/#!0ZBCEZjB!t5yXGbxE4Jyjs...fWMDovKbKU

Settings:
-PPU - Interpreter 2
-SPU - Interpreter ASMJIT
-DX12
-1280x720
-VSync
-XAudio

LLE:
-libdmux -> cellDmux_Library v1.1
-libdmuxpamf -> cellDmuxPamf_Library v1.1
-libresc -> cellResc_Library v1.1
-libsail-> cellSail_Library v1.1
-libsail_avi -> cellSailAvi_Library v1.1
-libsail_rec -> cellSailRec_Library v1.1
-libsmvd2 -> libsmvd2_Library v1.1
-libspurs_jq -> cellSpursJq_Library v1.1
-libsre.prx -> cellSre_Library v1.1
-libVdec -> cellVdec_Library v1.1
-------------------------------------------------------------------------------------------------
Quote:{PPU[0x10] Thread (main_thread) [0x00a42178]} HLE TODO: Unimplemented syscall sys_ss_access_control_engine -> CELL_OK
{PPU[0x10] Thread (main_thread) [0x00a89be8]} HLE TODO: Unimplemented syscall sys_ss_access_control_engine -> CELL_OK
{PPU[0x10] Thread (main_thread) [0x006d2a30]} sysPrxForUser TODO: _sys_process_atexitspawn()
{PPU[0x10] Thread (main_thread) [0x006d2b70]} sysPrxForUser TODO: _sys_process_at_Exitspawn

Quote:{PPU[0x10] Thread (main_thread) [0x00bdcd80]} sys_spu: Unsupported SPU Thread options (0x2)

Quote:{PPU[0x10] Thread (main_thread) [0x006d1810]} cellGcmSys: cellGcmSetTileInfo: bad compression mode! (7)
{PPU[0x10] Thread (main_thread) [0x006d1810]} cellGcmSys: cellGcmSetTileInfo: bad compression mode! (10)

Quote:{PPU[0x10] Thread (main_thread) [0x006d1850]} cellGcmSys TODO: cellGcmSetZcull(index=1, offset=0x2f60000, width=1024, height=2048, cullStart=0x0, zFormat=0x2, aaFormat=0x0, zCullDir=0x0, zCullFormat=0x1, sFunc=0x5, sRef=0x0, sMask=0xff)

Quote:{PPU[0x6cf] Thread (_libsail-control) [0x00bf2a3c]} sys_prx TODO: sys_prx_get_module_id_by_name(name=cellLibprof, flags=0, pOpt=*0x0)

Quote:{SPU[0x6e2] Thread (_libsailCellSpursKernel0) [0x08d78]} SPU: [0x08d7c] Branch-to-next with $LR
{PPU[0x719] Thread (_libsail-control) [0x00bdcd80]} sys_spu: Unsupported SPU Thread options (0x2)

Quote:{rsx::thread} RSX: Unknown/illegal instruction: 0x17 (forced unit 2)

Quote:{SPU[0x6a] Thread (NuccSpursCellSpursKernel1) [0x04c00]} SPU: 0x04c20: Unknown/Illegal opcode (0xa5a5a5a5)
{SPU[0x6a] Thread (NuccSpursCellSpursKernel1) [0x04c00]} SPU: 0x04c30: Unknown/Illegal opcode (0x4a4f4243)
{SPU[0x6a] Thread (NuccSpursCellSpursKernel1) [0x04c00]} SPU: 0x04c34: Unknown/Illegal opcode (0x52542056)
{SPU[0x6a] Thread (NuccSpursCellSpursKernel1) [0x04c00]} SPU: 0x04c38: Unknown/Illegal opcode (0x65723133)

Reply
#13
RPCS3 v0.0.5-6638-568118634 Alpha

Playable, good performance and didn't notice any issues.


Attached Files Thumbnail(s)
           

.gz   RPCS3.log.gz (Size: 583.23 KB / Downloads: 1)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)