SSSE3 question
Started by Olinbr




3 posts in this topic
Olinbr
Member


0
2 posts 1 threads Joined: Sep 2017
09-29-2017, 09:23 AM -
#1
How much effort would be required to skip using SSSE3?

I have an AMD 1100t Phenom II Hexcore CPU running at 4.0 ghz with 16 gb DDR3 and an AMD R9 390X video card.
It runs EVERYTHING I have thrown at it until I tried to run the emulator.

Only reason I have not upgraded yet is the fact that overclocked it is pretty danged powerful in it's own right, but primarily
it's because I have 9.5 TB of disk loaded with several different windows and a linux installation. 3 of the windows installations
are from the same license (Oh NO!) but they are used for different jobs. (Games, normal use, development). Rebuilding this
thing is going to be a nightmare.

So, Is there any hope of running a version without using SSSE3 ?

Thanks......
Ani
Administrator
*******


16
4,373 posts 105 threads Joined: Aug 2017
09-29-2017, 02:51 PM -
#2
Even if you did, performance would be so slow that it would be useless
    Desktop: Ryzen 7 5800X,   Radeon RX 6800 XT, 2x8G DDR4 3600MHz, Manjaro Linux
     Laptop: Ryzen 9 5900HX,  Radeon RX 6700M,   2x8G DDR4 3200MHz, Manjaro Linux
Old Desktop: AMD FX-8350,     Radeon R9 280X,    2x4G DDR3 1600MHz, Manjaro Linux
Olinbr
Member


0
2 posts 1 threads Joined: Sep 2017
09-30-2017, 01:06 PM -
#3
(09-29-2017, 02:51 PM)Ani Wrote: Even if you did, performance would be so slow that it would be useless

figures - So what is the minimum AMD FX cpu that would support this? Say if I were to get a new MB and an FX CPU and use much of my current system to keep the cost down, e.g. my R9 390x video card, x-fi extreme sound card, 16gb Crucial Ballistix DDR-1600 which is super overclockable on my current system. And, if necessary I can pair with another R9 390x video card doubling my GPU capability.

Is this feasible?

I am trying to determine the entry point for an AMD system. Obviously I wouldn't use the minimum cpu but I do want to know the starting point so I can decide just how much cpu I would need.


thanks for any advice...
Ani
Administrator
*******


16
4,373 posts 105 threads Joined: Aug 2017
09-30-2017, 08:15 PM -
#4
> AMD FX cpu that would support this?
None really, AM3+ CPUs are complete trash. They do have SSSE3 so they run RPCS3, but it's completely laggy. If choosing AMD, then it needs to be Ryzen / ThreadRipper.

> And, if necessary I can pair with another R9 390x video card doubling my GPU capability.
Doesn't matter too, RPCS3 barely uses the GPU. For now. And I don't believe SLI/CrossFire is going to be immediately supported when RPCS3 starts using the GPU a lot (e.g: with upscaling).

> I am trying to determine the entry point for an AMD system.
I personally recommend Ryzen 5 as an AMD entry point. Although I'd buy Intel myself if I had to get a new CPU because FX-8350 was already terrifying enough.
Note that new Intel 8th gen CPUs will have more cores, so they will probably be better than Ryzen 1st gen at some price points.

Bonus points for the AMD GPU you have there. NVIDIA drivers have issues that cause shaders to use up a lot of RAM (the same issue that affects Cemu).
This post was last modified: 09-30-2017, 08:16 PM by Ani.
    Desktop: Ryzen 7 5800X,   Radeon RX 6800 XT, 2x8G DDR4 3600MHz, Manjaro Linux
     Laptop: Ryzen 9 5900HX,  Radeon RX 6700M,   2x8G DDR4 3200MHz, Manjaro Linux
Old Desktop: AMD FX-8350,     Radeon R9 280X,    2x4G DDR3 1600MHz, Manjaro Linux


Forum Jump:


Users browsing this thread: 1 Guest(s)