NARUTO: Ultimate Ninja STORM [BLES00371]

Build : [efc87792] RPCS3 0.0.0.9

[Image: t2675460_gg.jpg]

Log: https://gist.github.com/SakataGintokiYT/...0292deec24
SPUJIT: https://mega.nz/#!BRRhwCoQ!t_jLpq_a42IHu...UpU0UoBuyI

Settings:
-PPU - Interpreter 2
-SPU - Interpreter ASMJIT
-DX12
-1280x720
-VSync
-XAudio

LLE:
-libdmux -> cellDmux_Library v1.1
-libdmuxpamf -> cellDmuxPamf_Library v1.1
-libresc -> cellResc_Library v1.1
-librtc -> cellRtc_Library
-libsail-> cellSail_Library v1.1
-libsail_avi -> cellSailAvi_Library v1.1
-libsail_rec -> cellSailRec_Library v1.1
-libsmvd2 -> libsmvd2_Library v1.1
-libspurs_jq -> cellSpursJq_Library v1.1
-libsre -> cellSre_Library v1.1
-libssl -> cellSsl_Library
-libVdec -> cellVdec_Library v1.1

{PPU[0x10] Thread (main_thread) [0x008c1590]} cellGcmSys: cellGcmSetTile: bad compression mode! (7)
{PPU[0x10] Thread (main_thread) [0x008c1590]} cellGcmSys: cellGcmSetTile: bad compression mode! (7)
{PPU[0x10] Thread (main_thread) [0x008c1590]} cellGcmSys: cellGcmSetTile: bad compression mode! (10)

{PPU[0x10] Thread (main_thread) [0x008c15b0]} cellGcmSys TODO: cellGcmSetZcull(index=2, offset=0x3c30000, width=640, height=384, cullStart=0x0, zFormat=0x2, aaFormat=0x0, zCullDir=0x0, zCullFormat=0x1, sFunc=0x201, sRef=0x80, sMask=0xff)

{SPU[0x2df] Thread (_libsailCellSpursKernel2) [0x08530]} SPU: [0x08534] Branch-to-next with $LR
{SPU[0x2df] Thread (_libsailCellSpursKernel2) [0x25c40]} SPU: [0x25c44] Branch-to-next with $LR
{SPU[0x2df] Thread (_libsailCellSpursKernel2) [0x14d58]} SPU: [0x14d5c] Branch-to-next with $LR
{SPU[0x2e0] Thread (_libsailCellSpursKernel3) [0x08d78]} SPU: [0x08d7c] Branch-to-next with $LR

{SPU[0x2de] Thread (_libsailCellSpursKernel1) [0x01614]} MEM: Invalid or unsupported instruction (op=0, reg=24, d_size=0, a_size=0x0, i_size=0)
{SPU[0x2de] Thread (_libsailCellSpursKernel1) [0x01614]} MEM: decode_x64_reg_op(00007ffc470fca44h): unsupported opcode found (0F2941F04C3B0DB95500007617E9C200)

{PPU[0x2ca] Thread (_libsail-control) [0x00e1fd80]} sys_spu: Unsupported SPU Thread options (0x2)

{PPU[0x2ca] Thread (_libsail-control) [0x00e35a3c]} sys_prx TODO: sys_prx_get_module_id_by_name(name=cellLibprof, flags=0, pOpt=*0x0)