Tales of Xillia [NPEB01310]
Started by GrantKane




5 posts in this topic
GrantKane
RPCS3 Tester


2
2,670 posts 1,777 threads Joined: Aug 2017
02-11-2020, 12:22 AM -
#1
RPCS3 v0.0.8-9567-dcb30df7 Alpha | HEAD | Firmware version: 4.85
Ingame.
[Image: bIMQYX9.png]
[Image: qTn9hmD.png]


Attached Files
.7z   RPCS3.7z (Size: 528.48 KB / Downloads: 71)
HerrHulaHoop
RPCS3 Tester


1
40 posts 8 threads Joined: Aug 2017
03-31-2020, 12:29 PM -
#2
RPCS3 v0.0.9-10010-1ceb779a Alpha | HEAD | Firmware version: 4.85
Intel® Core™ i7-4790 CPU @ 3.60GHz | 8 Threads | 15.94 GiB RAM | TSC: Bad | AVX+

Playable. Finished the game from start to finish on the emulator and performance was outstanding throughout. However, there are a few things to keep in mind:
  1. The DLC bug still remains. If you install more that 15 or 16 DLCs, the game will crash after the intro logos. Given that majority of the DLCs are costumes or cosmetics, I don't see this as an issue preventing the game from being playable. This issue has now been fixed.
  2. The game seems to run at unlocked FPS, so users need to set Framelimit to 60 (or enable VSync on a 60Hz monitor) and set Vblank rate to 30Hz. This will cap the FPS in the free-roam sections to 30FPS while providing 60FPS in battle sequences and menus, similar to what we see on an actual PlayStation 3.
  3. The game occasionally loses the background music after a few seconds into a scene. This happens once in a while when you transition from one event to another. However, the background music immediately returns if you move from one area or another, or even enter into a battle. It is very rare for this to actually have any prolonged impact since you continuously enter and exit events in this game. Also, some users have noted that limiting the PPU Threads option to 1 alleviates this issue. I didn't bother doing this, since the effects of this bug was extremely minimal.
  4. On rare occasions, the game crashes. This happened to me 3 times in my 45 hour playtime. Since I used the quick-save option often, I didn't lose any progress. The crashes were rare enough that I would still consider this game playable.
  5. Also, some people mentioned that the game was too dark on RPCS3. I compared it to footage from an actual PlayStation 3 and saw that it similar to what is present on RPCS3. So that's not really an issue with RPCS3, rather the game itself being quite dark.
Overall, I'd call this title comfortably playable. I barely saw any FPS drops anywhere in the game, locked 30FPS in the free-roam mode and locked 60FPS in battles and menus.
This post was last modified: 04-04-2020, 08:09 PM by HerrHulaHoop. Edit Reason: Added info on DLC bug being fixed


Attached Files Thumbnail(s)
                       


.7z   Xillia.log.7z (Size: 1.18 MB / Downloads: 22)
digitaldude
RPCS3 Tester


4
3,031 posts 559 threads Joined: Aug 2017
03-31-2020, 01:55 PM -
#3
Moving back til the ppu threads 1 thing fixed. But its playable if you follow hoop guide.
HerrHulaHoop
RPCS3 Tester


1
40 posts 8 threads Joined: Aug 2017
03-31-2020, 02:22 PM -
#4
(03-31-2020, 01:55 PM)digitaldude Wrote: Moving back til the ppu threads 1 thing fixed. But its playable if you follow hoop guide.

The contention is for Vblank tweak being a compulsory requirement. Not the audio thing.
Asinine
Moderator
*****


4
2,060 posts 83 threads Joined: Aug 2017
04-01-2020, 10:02 AM -
#5
Moving to playable, requires vblank set to 30hz so it automatically changes the frame-rate to 30fps for free-roam, and 60fps for other areas. This is totally fine for the playable statistic especially in a game like this.
Ani
Administrator
*******


16
4,380 posts 105 threads Joined: Aug 2017
12-01-2020, 08:02 AM -
#6
Current commit: 2aa5c437
Requires "Vblank rate" to be changed in order to be Playable

Moving back to Ingame until this issue is solved
    Desktop: Ryzen 7 5800X,   Radeon RX 6800 XT, 2x8G DDR4 3600MHz, Manjaro Linux
     Laptop: Ryzen 9 5900HX,  Radeon RX 6700M,   2x8G DDR4 3200MHz, Manjaro Linux
Old Desktop: AMD FX-8350,     Radeon R9 280X,    2x4G DDR3 1600MHz, Manjaro Linux


Forum Jump:


Users browsing this thread: 2 Guest(s)