Atelier Rorona Plus The Alchemist of Arland [BLES02050]

Save and load works, bug in wolf habitat when I fall trough the ground near the treasure box. The same bug as jumping in front of alchemy shop.

Tried this using latest build and followed these instructions

"You need to manually load libfs.sprx in addition to what is automatically loaded. In settings tick "load liblv2.sprx only" and in the long list of modules tick libfs.sprx. Leave every other module unchecked."

But it won't open with me. Its too early to guess but maybe the error is because of my crappy video card. Anyway attached is the log file.

Save and load works, bug in wolf habitat when I fall trough the ground near the treasure box. The same bug as jumping in front of alchemy shop.

Tried this using latest build and followed these instructions

"You need to manually load libfs.sprx in addition to what is automatically loaded. In settings tick "load liblv2.sprx only" and in the long list of modules tick libfs.sprx. Leave every other module unchecked."

But it won't open with me. Its too early to guess but maybe the error is because of my crappy video card. Anyway attached is the log file.

Do not untick "load required libraries". This must always be on.

Oh so that's a must then. I just did it. But its still not working. I posted the error and the log file. Now the first instructions on this forum said this

"when it enters the normal game it asks to install.
you enter boot mode and start game it starts to install and read the normal game as well"

now what did it mean by boot mode? The log said my GPU is not supported so... is it the video card afterall?

In general be careful about following very old instructions and such. They are often not true in modern emulator versions.

Anyway:

Code:

·E 0:00:01.601502 {rsx::thread} RSX: OpenGL: initialization of glDepthBoundsEXT failed.
·E 0:00:01.601581 {rsx::thread} RSX: OpenGL: initialization of glGetTextureImage failed.
·E 0:00:01.601595 {rsx::thread} RSX: OpenGL: initialization of glTextureBufferRange failed.
·! 0:00:01.601616 {rsx::thread} RSX: 3.3.0 - Build 20.19.15.4390
·! 0:00:01.601623 {rsx::thread} RSX: 3.30 - Build 20.19.15.4390
·! 0:00:01.601628 {rsx::thread} RSX: Intel

Yup, your Intel graphics do not (properly) support modern OpenGL. So RPCS3 will not run.

If you have a desktop and not a laptop I recommend buying the cheapest modern GPU you can find. Some used Radeon R7 250 or whatever is more than fast enough as PS3 graphics are PS3 graphics and not demanding at all. You could go even older but having something with Vulkan and DirectX12 support is helpful.

In general be careful about following very old instructions and such. They are often not true in modern emulator versions.

Anyway:

Code:

·E 0:00:01.601502 {rsx::thread} RSX: OpenGL: initialization of glDepthBoundsEXT failed.
·E 0:00:01.601581 {rsx::thread} RSX: OpenGL: initialization of glGetTextureImage failed.
·E 0:00:01.601595 {rsx::thread} RSX: OpenGL: initialization of glTextureBufferRange failed.
·! 0:00:01.601616 {rsx::thread} RSX: 3.3.0 - Build 20.19.15.4390
·! 0:00:01.601623 {rsx::thread} RSX: 3.30 - Build 20.19.15.4390
·! 0:00:01.601628 {rsx::thread} RSX: Intel

Yup, your Intel graphics do not (properly) support modern OpenGL. So RPCS3 will not run.

If you have a desktop and not a laptop I recommend buying the cheapest modern GPU you can find. Some used Radeon R7 250 or whatever is more than fast enough as PS3 graphics are PS3 graphics and not demanding at all. You could go even older but having something with Vulkan and DirectX12 support is helpful.

Trust me. I would buy if I could. This is actually a desktop but its built for work purposes, and I'm under my family's thumb when it comes to playing games. Are there any RPG PS3 games at all that works with intel? So far Diva F is the only thing I can get to work. Hmm... since I can boot rpcs3 with Graces then maybe that can work eventually.

In general be careful about following very old instructions and such. They are often not true in modern emulator versions.

Anyway:

Code:

·E 0:00:01.601502 {rsx::thread} RSX: OpenGL: initialization of glDepthBoundsEXT failed.
·E 0:00:01.601581 {rsx::thread} RSX: OpenGL: initialization of glGetTextureImage failed.
·E 0:00:01.601595 {rsx::thread} RSX: OpenGL: initialization of glTextureBufferRange failed.
·! 0:00:01.601616 {rsx::thread} RSX: 3.3.0 - Build 20.19.15.4390
·! 0:00:01.601623 {rsx::thread} RSX: 3.30 - Build 20.19.15.4390
·! 0:00:01.601628 {rsx::thread} RSX: Intel

Yup, your Intel graphics do not (properly) support modern OpenGL. So RPCS3 will not run.

If you have a desktop and not a laptop I recommend buying the cheapest modern GPU you can find. Some used Radeon R7 250 or whatever is more than fast enough as PS3 graphics are PS3 graphics and not demanding at all. You could go even older but having something with Vulkan and DirectX12 support is helpful.

Trust me. I would buy if I could. This is actually a desktop but its built for work purposes, and I'm under my family's thumb when it comes to playing games. Are there any RPG PS3 games at all that works with intel? So far Diva F is the only thing I can get to work. Hmm... since I can boot rpcs3 with Graces then maybe that can work eventually.

Maybe some very simple games would work. Also what CPU do you have? It may have much better OpenGL support under Linux. I think Haswell+ has full OpenGL 4.5 support on Linux? Not sure.

In general be careful about following very old instructions and such. They are often not true in modern emulator versions.

Anyway:

Code:

·E 0:00:01.601502 {rsx::thread} RSX: OpenGL: initialization of glDepthBoundsEXT failed.
·E 0:00:01.601581 {rsx::thread} RSX: OpenGL: initialization of glGetTextureImage failed.
·E 0:00:01.601595 {rsx::thread} RSX: OpenGL: initialization of glTextureBufferRange failed.
·! 0:00:01.601616 {rsx::thread} RSX: 3.3.0 - Build 20.19.15.4390
·! 0:00:01.601623 {rsx::thread} RSX: 3.30 - Build 20.19.15.4390
·! 0:00:01.601628 {rsx::thread} RSX: Intel

Yup, your Intel graphics do not (properly) support modern OpenGL. So RPCS3 will not run.

If you have a desktop and not a laptop I recommend buying the cheapest modern GPU you can find. Some used Radeon R7 250 or whatever is more than fast enough as PS3 graphics are PS3 graphics and not demanding at all. You could go even older but having something with Vulkan and DirectX12 support is helpful.

Trust me. I would buy if I could. This is actually a desktop but its built for work purposes, and I'm under my family's thumb when it comes to playing games. Are there any RPG PS3 games at all that works with intel? So far Diva F is the only thing I can get to work. Hmm... since I can boot rpcs3 with Graces then maybe that can work eventually.

Maybe some very simple games would work. Also what CPU do you have? It may have much better OpenGL support under Linux. I think Haswell+ has full OpenGL 4.5 support on Linux? Not sure.

I know almost squat about CPU's and drivers too. If someone asks I always show this
http://sta.sh/020qzlmbvjim

I'm also at windows 10. Oh if you mean what kind of intel do I have then there's an attached tag here. Intel Core i3.

In general be careful about following very old instructions and such. They are often not true in modern emulator versions.

Anyway:

Code:

·E 0:00:01.601502 {rsx::thread} RSX: OpenGL: initialization of glDepthBoundsEXT failed.
·E 0:00:01.601581 {rsx::thread} RSX: OpenGL: initialization of glGetTextureImage failed.
·E 0:00:01.601595 {rsx::thread} RSX: OpenGL: initialization of glTextureBufferRange failed.
·! 0:00:01.601616 {rsx::thread} RSX: 3.3.0 - Build 20.19.15.4390
·! 0:00:01.601623 {rsx::thread} RSX: 3.30 - Build 20.19.15.4390
·! 0:00:01.601628 {rsx::thread} RSX: Intel

Yup, your Intel graphics do not (properly) support modern OpenGL. So RPCS3 will not run.

If you have a desktop and not a laptop I recommend buying the cheapest modern GPU you can find. Some used Radeon R7 250 or whatever is more than fast enough as PS3 graphics are PS3 graphics and not demanding at all. You could go even older but having something with Vulkan and DirectX12 support is helpful.

Trust me. I would buy if I could. This is actually a desktop but its built for work purposes, and I'm under my family's thumb when it comes to playing games. Are there any RPG PS3 games at all that works with intel? So far Diva F is the only thing I can get to work. Hmm... since I can boot rpcs3 with Graces then maybe that can work eventually.

Maybe some very simple games would work. Also what CPU do you have? It may have much better OpenGL support under Linux. I think Haswell+ has full OpenGL 4.5 support on Linux? Not sure.

I know almost squat about CPU's and drivers too. If someone asks I always show this
http://sta.sh/020qzlmbvjim

I'm also at windows 10. Oh if you mean what kind of intel do I have then there's an attached tag here. Intel Core i3.

That would be Skylake. Update the drivers from here: https://downloadcenter.intel.com/downloa...dows-15-45-

Then try all of OpenGL, Vulkan, and DirectX 12. Don't forget to select the Intel card in the D3D list when you are on DirectX12. Something like this:


This must work after manually updating the drivers (those from Windows update may be incomplete regarding Vulkan support and such), get back to me again.

That would be Skylake. Update the drivers from here: https://downloadcenter.intel.com/downloa...dows-15-45-

Then try all of OpenGL, Vulkan, and DirectX 12. Don't forget to select the Intel card in the D3D list when you are on DirectX12. Something like this:


This must work after manually updating the drivers (those from Windows update may be incomplete regarding Vulkan support and such), get back to me again.

This pull requests https://github.com/RPCS3/rpcs3/pull/2682 basically banned Intel HD graphics. Previously Intel HD and OpenGL worked fine.

Trust me. I would buy if I could. This is actually a desktop but its built for work purposes, and I'm under my family's thumb when it comes to playing games. Are there any RPG PS3 games at all that works with intel? So far Diva F is the only thing I can get to work. Hmm... since I can boot rpcs3 with Graces then maybe that can work eventually.

Maybe some very simple games would work. Also what CPU do you have? It may have much better OpenGL support under Linux. I think Haswell+ has full OpenGL 4.5 support on Linux? Not sure.

I know almost squat about CPU's and drivers too. If someone asks I always show this
http://sta.sh/020qzlmbvjim

I'm also at windows 10. Oh if you mean what kind of intel do I have then there's an attached tag here. Intel Core i3.

That would be Skylake. Update the drivers from here: https://downloadcenter.intel.com/downloa...dows-15-45-

Then try all of OpenGL, Vulkan, and DirectX 12. Don't forget to select the Intel card in the D3D list when you are on DirectX12. Something like this:


This must work after manually updating the drivers (those from Windows update may be incomplete regarding Vulkan support and such), get back to me again.

Hello! It appears that the driver installation has worked. I had to look up this page as I couldn't install the driver directly
https://steamcommunity.com/app/233250/di...911446231/

but anyway D3D12 and Vulcan doesn't hang anymore for me so I tried this game again. I followed the instructions on the first page.
1. Recompilers for both
2. load livlv2.sprx only
3. load required libraries
4. check the intel graphics for the adapter
5. also placed the game in "/dev_hdd0/game/BLES02050"

Now my problem is that it says that game data is corrupt. I tried deleting the game data too but same problem persists. Attached is the pic and log file.