RPCS3 doesn't launch

I've upgraded to a RX6600 (uninstalled old Nvidia drivers with DDU) and 15124 still doesn't open. I think it might be good to share what happened after the change. PC wasn't formatted.

First attempt gave the following log:
RPCS3 v0.0.28-15124-c8577592 Alpha | master
Intel® Core™ i5-9600K CPU @ 3.70GHz | 6 Threads | 15.94 GiB RAM | TSC: 3.696GHz | AVX+ | FMA3 | TSX-FA disabled by default
Operating system: Windows, Major: 10, Minor: 0, Build: 19045, Service Pack: none, Compatibility mode: 0
Qt version: Compiled against Qt 5.15.2 | Run-time uses Qt 5.15.2
Current Time: 2023-06-20T03:23:36
Thread time: 0.000000s (0.001440Gc); Faults: 0 [rsx:0, spu:0]; [soft:0 hard:0]; Switches:[vol:0 unvol:0]; Wait:[0.000s, spur:0]
·! 0:00:00.035061 SYS: Initialization times before main(): 0.207371Gc
·! 0:00:00.035069 SYS: argc: 1, argv: 'F:\La\RPCS3 15124\rpcs3.exe'
·! 0:00:00.490550 UUID: Installation ID: {bc96def6-9050-4077-bd52-e10f000931e5}
·A 0:00:01.134936 {Vulkan Device Enumeration Thread} RSX: Found vulkan-compatible GPU: 'AMD Radeon RX 6600' running on driver 2.0.262
·! 0:00:01.143413 {Vulkan Device Enumeration Thread} SIG: Thread time: 0.093750s (0.242533Gc); Faults: 0 [rsx:0, spu:0]; [soft:0 hard:0]; Switches:[vol:0 unvol:0]; Wait:[0.000s, spur:0]
·! 0:00:01.143449 CFG: Setting the default renderer to Vulkan. Default GPU: 'AMD Radeon RX 6600'
·! 0:00:01.143479 SYS: Setting user ID '00000001'
·! 0:00:01.146779 VFS: VFS config missing. Using default settings. Path: F:/La/RPCS3 15124/config/vfs.yml
·! 0:00:01.146835 SYS: Using VFS config:
$(EmulatorDir): ""
/dev_hdd0/: $(EmulatorDir)dev_hdd0/
/dev_hdd1/: $(EmulatorDir)dev_hdd1/
/dev_flash/: $(EmulatorDir)dev_flash/
/dev_flash2/: $(EmulatorDir)dev_flash2/
/dev_flash3/: $(EmulatorDir)dev_flash3/
/dev_bdvd/: $(EmulatorDir)dev_bdvd/
/games/: $(EmulatorDir)games/
/app_home/: ""
/dev_usb***/:
  /dev_usb000:
    Path: $(EmulatorDir)dev_usb000/
    Serial: ""
    VID: ""
    PID: ""
·! 0:00:01.146866 VFS: Mounted path "/dev_hdd0" to "F:/La/RPCS3 15124/dev_hdd0/"
·! 0:00:01.146872 VFS: Mounted path "/dev_flash" to "F:/La/RPCS3 15124//dev_flash/"
·! 0:00:01.146873 VFS: Mounted path "/dev_flash2" to "F:/La/RPCS3 15124//dev_flash2/"
·! 0:00:01.146875 VFS: Mounted path "/dev_flash3" to "F:/La/RPCS3 15124//dev_flash3/"
·! 0:00:01.146876 VFS: Mounted path "/app_home" to "//"
·! 0:00:01.147007 VFS: Mounted path "/dev_usb000" to "F:/La/RPCS3 15124/dev_usb000/"
·! 0:00:01.147064 SYS: Applying global config: F:/La/RPCS3 15124//config.yml

---

Second attempt gave a different log, much closer to the ones from the 970:
RPCS3 v0.0.28-15124-c8577592 Alpha | master
Intel® Core™ i5-9600K CPU @ 3.70GHz | 6 Threads | 15.94 GiB RAM | TSC: 3.696GHz | AVX+ | FMA3 | TSX-FA disabled by default
Operating system: Windows, Major: 10, Minor: 0, Build: 19045, Service Pack: none, Compatibility mode: 0
Qt version: Compiled against Qt 5.15.2 | Run-time uses Qt 5.15.2
Current Time: 2023-06-20T03:23:54
Thread time: 0.000000s (0.001564Gc); Faults: 0 [rsx:0, spu:0]; [soft:0 hard:0]; Switches:[vol:0 unvol:0]; Wait:[0.000s, spur:0]
·! 0:00:00.006778 SYS: Initialization times before main(): 0.113287Gc
·! 0:00:00.006786 SYS: argc: 1, argv: 'F:\La\RPCS3 15124\rpcs3.exe'
·! 0:00:00.015637 UUID: Installation ID: {bc96def6-9050-4077-bd52-e10f000931e5}
·A 0:00:00.060844 {Vulkan Device Enumeration Thread} RSX: Found vulkan-compatible GPU: 'AMD Radeon RX 6600' running on driver 2.0.262

Hope this ends up being helpful.