Known Issue: Unhandled Win32 exception 0xC0000005 on Module name: 'msvcrt.dll'

This thread is a collection of all the other posts submitted regarding this issue

If you have an 0xC0000005 window with Module name: msvcrt.dll

Code:

Thread terminated due to fatal error: Unhandled Win32 exception 0xC0000005.
(...)
Module name: 'msvcrt.dll'.

The solution is:
- Update RPCS3 to v0.0.32-16561

Old workaround (no longer required):
- Go on Windows' Audio Input Device settings
- Disable "Asus AI Microphone"

If you have any other error codes or module names than the ones listed here, your issue is not the same
Any replies for other issues in this thread will be deleted

I just download and install the latest version of RPCS3 to Win10 x64 (latest update)

- Win10 10.0.19043 x64
- AMD Ryzen 5 3600 (Latest Chipset Driver) 2.17.25.506
- Inno GTX 1660Ti (Latest Driver) 4.66.63
- try re-install all the VC_redist_x64

after unzip RPCS3 zip files, and run rpcs3.exe , (also tried run as admin, same error)

It pops out an error, any advise how I can fix this error and able to run rpcs3 ? thanks

--------------
RPCS3 v0.0.16-12363-baa422e6 Alpha | HEAD
AMD Ryzen 5 3600 6-Core Processor | 12 Threads | 31.92 GiB RAM | TSC: 3.600GHz | AVX+ | FMA3
Operating system: Windows, Major: 10, Minor: 0, Build: 19043, Service Pack: none, Compatibility mode: 0
Qt version: Compiled against Qt 5.15.2 | Run-time uses Qt 5.15.2
Thread time: 0.000000s (0.002024Gc); Faults: 0 [rsx:0, spu:0]; [soft:0 hard:0]; Switches:[vol:0 unvol:0]; Wait:[0.000s, spur:0]
·! 0:00:00.004446 SYS: Initialization times before main(): 0.150619Gc
·! 0:00:00.004453 SYS: argc: 1, argv: 'D:\Emulator\RPCS3\rpcs3.exe'
·F 0:00:00.538592 {TID: 17476} SIG: Thread terminated due to fatal error: Unhandled Win32 exception 0xC0000005.
Segfault reading location 0000000000000000 at 00007ff8e225df60.
Thread id = 17476.
Instruction address: 00007ff8e225df60.
Module name: 'msvcrt.dll'.
Module base: 00007ff8e2200000.
RPCS3 image base: 0000000000010000.

-------------

Hi
I got Fatal error every time I try to start rpcs3.exe.

RPCS3 v0.0.17-12634-b928cb02 Alpha | HEAD
Intel® Core™ i9-10900K CPU @ 3.70GHz | 20 Threads | 31.85 GiB RAM | TSC: 3.696GHz | AVX+ | FMA3
Operating system: Windows, Major: 10, Minor: 0, Build: 19043, Service Pack: none, Compatibility mode: 0
Qt version: Compiled against Qt 5.15.2 | Run-time uses Qt 5.15.2
Thread time: 0.000000s (0.002031Gc); Faults: 0 [rsx:0, spu:0]; [soft:0 hard:0]; Switches:[vol:0 unvol:0]; Wait:[0.000s, spur:0]
·! 0:00:00.004329 SYS: Initialization times before main(): 0.143786Gc
·! 0:00:00.004334 SYS: argc: 1, argv: 'C:\rpcs3-v0.0.17-12634-b928cb02_win64\rpcs3.exe'
·F 0:00:00.256950 {TID: 15200} SIG: Thread terminated due to fatal error: Unhandled Win32 exception 0xC0000005.
Segfault reading location 0000000000000000 at 00007fff9ce9df60.
Thread id = 15200.
Instruction address: 00007fff9ce9df60.
Module name: 'msvcrt.dll'.
Module base: 00007fff9ce40000.
RPCS3 image base: 0000000000010000.


Any help for this is Appreciable.
thanks
Windows 10 21H1 Build: 19043.1165

RPCS3 v0.0.18-12859-71b15c1f Alpha | HEAD
AMD Ryzen 5 5600X 6-Core Processor | 12 Threads | 31.92 GiB RAM | TSC: 3.700GHz | AVX+ | FMA3
Operating system: Windows, Major: 10, Minor: 0, Build: 19043, Service Pack: none, Compatibility mode: 0
Qt version: Compiled against Qt 5.15.2 | Run-time uses Qt 5.15.2
Thread time: 0.000000s (0.001376Gc); Faults: 0 [rsx:0, spu:0]; [soft:0 hard:0]; Switches:[vol:0 unvol:0]; Wait:[0.000s, spur:0]
·! 0:00:00.003510 SYS: Initialization times before main(): 0.143242Gc
·! 0:00:00.003515 SYS: argc: 1, argv: 'D:\Emulator\Playstation 3\rpcs3.exe'
·F 0:00:00.018020 {TID: 12944} SIG: Thread terminated due to fatal error: Unhandled Win32 exception 0xC0000005.
Segfault reading location 0000000000000000 at 00007ff81720df60.
Thread id = 12944.
Instruction address: 00007ff81720df60.
Module name: 'msvcrt.dll'.
Module base: 00007ff8171b0000.
RPCS3 image base: 0000000000010000.    


Vga - Rx580 8gb ram

Windows 10 Home Single Language , 21H1

sometimes it works normal, very strange.

I download all the software provided in quickstart, my drivers are up to date, pc specs meets the Recommended Requirements but i can't get the emulator to work.

RPCS3 v0.0.19-13101-2f93df48 Alpha | HEAD
AMD Ryzen 5 5600X 6-Core Processor | 12 Threads | 15.91 GiB RAM | TSC: 3.693GHz | AVX+ | FMA3
Operating system: Windows, Major: 10, Minor: 0, Build: 19043, Service Pack: none, Compatibility mode: 0
Qt version: Compiled against Qt 5.15.2 | Run-time uses Qt 5.15.2
Thread time: 0.000000s (0.001245Gc); Faults: 0 [rsx:0, spu:0]; [soft:0 hard:0]; Switches:[vol:0 unvol:0]; Wait:[0.000s, spur:0]
·! 0:00:00.003491 SYS: Initialization times before main(): 0.103711Gc
·! 0:00:00.003496 SYS: argc: 1, argv: 'C:\Users\Jorunas\Desktop\RPCS3\rpcs3.exe'
·F 0:00:00.018788 {TID: 9376} SIG: Thread terminated due to fatal error: Unhandled Win32 exception 0xC0000005.
Segfault reading location 0000000000000000 at 00007ffc0c3cdf60.
Thread id = 9376.
Instruction address: 00007ffc0c3cdf60.
Module name: 'msvcrt.dll'.
Module base: 00007ffc0c370000.
RPCS3 image base: 0000000000010000.

screenshot: //www52.zippyshare.com/v/xP6PwJnZ/file.html

Disable ASUS AI Microphone on Audio Settings - Input

Disable ASUS AI Microphone on Audio Settings - Input

It worked. Thanks for help. What a weird bug. How could ASUS AI Microphone cause emulator to not launch?

Hello everyone,

someone could help me with this error when i tried to install the RPCS3.

I tried to install different version from to day, to 90 days ago and had the same result.

Attach the log file...

HW Info:

Intel i7-11700K
ASUS B560-M Plus[attachment=23696]
NVIDIA GeForce RTX 3070 EVGA

Thanks!

[attachment=23696]

You attached a file that's smaller than 1kb, it's an empty file
Show a screenshot of the error

You attached a file that's smaller than 1kb, it's an empty file
Show a screenshot of the error

   

Sorry, here the SS of the error window.

Thanks.