Error SRW OG Saga (Masou Kishin III and Masou Kinshi F)

the error is

E {PPU[0x1000046] Thread (_libsail-control) [0x005e8d04]} 'sys_mutex_unlock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x100004b] Thread (_dmux_pamf_ppu_thread) [0x0062609c]} 'sys_mutex_lock' failed with 0x80010005 : CELL_ESRCH
F {PPU[0x100004b] Thread (_dmux_pamf_ppu_thread) [0x0062609c]} struct vm::access_violation thrown: Access violation reading address 0x1c

freeze the screen and Emulator+Game

I haven't problem with SRW Z3.1

Read this: http://www.emunewz.net/forum/showthread.php?tid=171465

Attach the full log file rpcs3.log by putting it in a .zip and attaching it here on the forums.

This ?

all version of RPCS3 Has the same problem

Use the latest RPCS3 version: https://rpcs3.net/download

Then download a PS3 firmware update (https://www.playstation.com/en-us/suppor...dates/ps3/) and install it from rpcs3 menu tools -> install firmware.

Try again.

E {PPU[0x1000021] Thread (_libsail-control) [0x004c97e0]} 'sys_mutex_unlock' failed with 0x80010005 : CELL_ESRCH
E {PPU[0x1000026] Thread (_dmux_pamf_ppu_thread) [0x004c8f1c]} 'sys_mutex_lock' failed with 0x80010005 : CELL_ESRCH
F {PPU[0x1000026] Thread (_dmux_pamf_ppu_thread) [0x004c8e9c]} MEM: Access violation reading location 0x1c

rpcs3-v0.0.2-2017-03-12-b70a1edb_win64

same problem and intall firmware update


The Game is Playable but freeze in Some battles

You didn't do what I told you to do, use the latest RPCS3 version and then reinstall firmware after updating.

i did it again

last version RPCS3 https://ci.appveyor.com/project/rpcs3/rp.../artifacts

Install firmware
https://www.playstation.com/en-us/suppor...dates/ps3/

RPCS3 > Tools > Install Firmware > config RPCS3 and open game

The problem literally is that when the characters use their ultimate the game is freeze in SRW OG III in F is not playable after Stage 2

You literally aren't using the latest version, your log file starts with:

RPCS3 v0.0.1-5-1f45f05 Pre-Alpha

While mine starts with:

RPCS3 v0.0.2-3-b70a1ed Alpha

Download the .zip from the link, replace whatever .exe you are starting with the one you just downloaded. And when you are actually running v. 0.0.2 reinstall firmware.

This is rare http://prnt.sc/ejfxc8

Maybe I was wrong to send the file, let's try now

Try this: in settings tick "load liblv2.sprx only" and in the modules list tick "libvdec.sprx". Leave every other module unchecked, they will be selected automatically.