Disgaea 3: Absence of Justice [BLUS30181]

Hello. The compatibility list said that this is playable, but I'm having problems. I followed these LLE modules
http://www.emunewz.net/forum/showthread....#pid234509

but I couldn't even get past the intro. Now I watched a youtube video and followed the modules they used.
https://www.youtube.com/watch?v=6a6YrAgp27Y

I was able to get past the intro. Sometimes I'm able to pass the first few cut scenes but sometimes no. Anyway attached is my log file. Any help please? The biggest problem is FPS, which is just 5 or less.

BTW I just tried. Changing the SPU and PPU decoders don't change anything. My RPCS3 also freezes when attempting to use D3D12 and Vulcan.

Too many LLE modules and not using the latest master branch version from here: https://ci.appveyor.com/project/rpcs3/rp.../artifacts

Then try with a minimal set of modules. No sound or anything but should get you ingame:
- libl10n.sprx
- libresc.sprx
- libspurs_jq.sprx
- libsre.sprx

From here add missing modules for music and opening video, try this list: http://www.emunewz.net/forum/showthread....#pid244983

Hello. The compatibility list said that this is playable, but I'm having problems. I followed these LLE modules
http://www.emunewz.net/forum/showthread....#pid234509

but I couldn't even get past the intro. Now I watched a youtube video and followed the modules they used.
https://www.youtube.com/watch?v=6a6YrAgp27Y

I was able to get past the intro. Sometimes I'm able to pass the first few cut scenes but sometimes no. Anyway attached is my log file. Any help please? The biggest problem is FPS, which is just 5 or less.

BTW I just tried. Changing the SPU and PPU decoders don't change anything. My RPCS3 also freezes when attempting to use D3D12 and Vulcan.

Too many LLE modules and not using the latest master branch version from here: https://ci.appveyor.com/project/rpcs3/rp.../artifacts

Then try with a minimal set of modules. No sound or anything but should get you ingame:
- libl10n.sprx
- libresc.sprx
- libspurs_jq.sprx
- libsre.sprx

From here add missing modules for music and opening video, try this list: http://www.emunewz.net/forum/showthread....#pid244983

okay thank you. I'll see what comes up when I try it. Just curious. Is sprx the same as prx or sprx.elf? I checked my LLE's and sometimes they have those two instead.

Yeah the file name extension doesn't matter now.

Yeah the file name extension doesn't matter now.

I see. I'll try it again, using either prx or jq.sprx depending on what I have. I'll just message again if there happens to be a problem. Although most people keep mentioning Vulcan which always freezes and crashes when I use it. Maybe the overall problem is my own graphics card. Intel ugh.

Intel graphics aren't very compatible. On Skylake+ some games work with OpenGL or DX12 (I think) but it can be buggy.

I so want to play this game on pc and have been trying for hours. I can get it to the now loading, but the tty text just shows this:

********************************************************
NisAnmInit()
********************************************************
* NisMovie_Play: ERROR! exit. (ret=0x80610003, file=NisLib/NisMovie.cpp:956)

These are the errors I get:
E LDR: Unknown function '0x05893E7C' in module 'cellLibprof' (index 3003)
E LDR: Unknown function '0x6D045C2E' in module 'cellLibprof' (index 3004)
E LDR: Unknown function '0x9FB6228E' in module 'sysPrxForUser' (index 3005)
E {PPU[0x1000000] Thread (main_thread) [0x002116c8]} 'sys_mutex_lock' failed with 0x80010008 : CELL_EDEADLK
E {PPU[0x1000000] Thread (main_thread) [0x00212300]} 'sys_mutex_unlock' failed with 0x80010009 : CELL_EPERM
E {SPU[0x2000007] Thread (_libdmux_pamfCellSpursKernel0)} SPU: [0x08d7c] Branch-to-next with $LR

I've tried with the bare bones sprx's listed here, the ones in the bug reply that raven posted and other combinations. Do sprx vs prx matter? What are these .elf files that raven posted about?

I'm also on win7 64 and using opengl (though, trying vulcan also got stuck on the now loading portion). Updated to the latest nvidia drivers. Running on 8gb of ram, on an AMD FX 6200, NVidia 750TI

Please help and thanks in advance!

I so want to play this game on pc and have been trying for hours. I can get it to the now loading, but the tty text just shows this:

********************************************************
NisAnmInit()
********************************************************
* NisMovie_Play: ERROR! exit. (ret=0x80610003, file=NisLib/NisMovie.cpp:956)

These are the errors I get:
E LDR: Unknown function '0x05893E7C' in module 'cellLibprof' (index 3003)
E LDR: Unknown function '0x6D045C2E' in module 'cellLibprof' (index 3004)
E LDR: Unknown function '0x9FB6228E' in module 'sysPrxForUser' (index 3005)
E {PPU[0x1000000] Thread (main_thread) [0x002116c8]} 'sys_mutex_lock' failed with 0x80010008 : CELL_EDEADLK
E {PPU[0x1000000] Thread (main_thread) [0x00212300]} 'sys_mutex_unlock' failed with 0x80010009 : CELL_EPERM
E {SPU[0x2000007] Thread (_libdmux_pamfCellSpursKernel0)} SPU: [0x08d7c] Branch-to-next with $LR

I've tried with the bare bones sprx's listed here, the ones in the bug reply that raven posted and other combinations. Do sprx vs prx matter? What are these .elf files that raven posted about?

I'm also on win7 64 and using opengl (though, trying vulcan also got stuck on the now loading portion). Updated to the latest nvidia drivers. Running on 8gb of ram, on an AMD FX 6200, NVidia 750TI

Please help and thanks in advance!

You need to post the full log file, rpcs3.log. Zip it and attach.

First try what I wrote here: http://www.emunewz.net/forum/showthread....#pid245006

Hi, I tired the following libs and it ran.

- libl10n.sprx
- libresc.sprx
- libspurs_jq.sprx
- libsre.sprx


When I tired the one's listen in that link it didn't work. Just spammed an error seen in the following log.
http://www82.zippyshare.com/v/mbeGf43p/file.html

Hi, I tired the following libs and it ran.

- libl10n.sprx
- libresc.sprx
- libspurs_jq.sprx
- libsre.sprx


When I tired the one's listen in that link it didn't work. Just spammed an error seen in the following log.
http://www82.zippyshare.com/v/mbeGf43p/file.html

Yeah, that got it working for me, though at a lovely 4-5fps Guess the idea of playing that game on the pc is out the window for now

Yeah, guess you need like an i7 or something. Maybe NISA will port it to the PC...