Journey not working

Hello! I'm having issues with playing the game "Journey." Whenever I launch it it just pops up with a grey screen and nothing else. If I am doing anything wrong, loading up the wrong libraries and so on. I would appreciate it if someone told me. Thanks!

Specs:
Processor: Intel Core i7-4770K
GPU: Nvidia Geforce GTX 760

You need to load libsre and libjpgdec according to that log;

·U {PPU[0x80000000] Thread (main_thread) [0x00199240]} cellJpgDec TODO: cellJpgDecDestroy
·W {PPU[0x80000005] Thread (MultiStream PU Thread) [0x00198d40]} cellSpurs: cellSpursEventFlagWait(eventFlag=*0xca0980, mask=*0x1e933c, mode=1)

And libfs (im sure it needs it since it has the same error what Ar Tonelico had before some FS changes and AT is bootable with libfs https://github.com/RPCS3/rpcs3/issues/1391 )

I enabled libsre and libjpgdec the window just opened and closed, still grey. Then I tried enabling the libfs with the other two same results. RPCS3_1 has the log with just the two enabled.

While RPCS3_2 has the log with libfs loaded with the other two. Still gives me same result with window opening and closing.

You need libresc too

I enabled libresc, libfs, libsre, and libjpgdec. Still same result with window just opening and closing.

So I went looking through the log. I need to know what:
_sys_process_atexitspawn()
_sys_process_at_Exitspawn

Are, since that's what's appearing after "TODO"

I've asked my friend to lend me his acc so i can get the game, rpcs3 can boot it, but crashes before reaching menu

There are 2 sprx files in the game's USRDIR\DATA\PRX folder, you need to decrypt them (then they become PRX), and rename them back to sprx. (otherwise rpcs3 will hang with an error msg dialog you can't read)
[Image: s0gvsJe.png]


If you done everything right then you will see this:


[Image: TNW790j.png]
[Image: I1BQFlr.png]
[Image: fryhfcg.png]
[Image: iX8M7HV.png]

After this screen you will get this

Code:

F {PPU[0x80000000] Thread (main_thread) [0x001cd408]} struct vm::access_violation thrown: Access violation reading address 0x7c0802bb

PS: You can't use ASMJIT at SPU because this game sometimes hits the unimplemented instruction

Code:

F {SPU[0x88] Thread (CellSpursKernel4)} class std::runtime_error thrown: Unimplemented instruction
(in file C:\rpcs3\rpcs3\Emu\Cell\SPUASMJITRecompiler.cpp:920)

And also on Interpreters it sometimes hits this:

Code:

F {SPU[0x8a] Thread (CellSpursKernel5) [0x02c04]} class std::runtime_error thrown: Unknown/illegal channel (ch=1 [$SPU_WrEventMask], value=0x2)
(in file C:\rpcs3\rpcs3\Emu\Cell\SPUThread.cpp:1122)

And also you should re-rip your game from your PS3. (because even if i don't decrypt the 2 prx files, game still doesn't close.)

edit: LOG: https://gist.github.com/Nezarn/e13cc678c...f6b9a5b4d9

I've asked my friend to lend me his acc so i can get the game, rpcs3 can boot it, but crashes before reaching menu

There are 2 sprx files in the game's USRDIR\DATA\PRX folder, you need to decrypt them (then they become PRX), and rename them back to sprx. (otherwise rpcs3 will hang with an error msg dialog you can't read)
[Image: s0gvsJe.png]


If you done everything right then you will see this:


[Image: TNW790j.png]
[Image: I1BQFlr.png]
[Image: fryhfcg.png]
[Image: iX8M7HV.png]

After this screen you will get this

Code:

F {PPU[0x80000000] Thread (main_thread) [0x001cd408]} struct vm::access_violation thrown: Access violation reading address 0x7c0802bb

PS: You can't use ASMJIT at SPU because this game sometimes hits the unimplemented instruction

Code:

F {SPU[0x88] Thread (CellSpursKernel4)} class std::runtime_error thrown: Unimplemented instruction
(in file C:\rpcs3\rpcs3\Emu\Cell\SPUASMJITRecompiler.cpp:920)

And also on Interpreters it sometimes hits this:

Code:

F {SPU[0x8a] Thread (CellSpursKernel5) [0x02c04]} class std::runtime_error thrown: Unknown/illegal channel (ch=1 [$SPU_WrEventMask], value=0x2)
(in file C:\rpcs3\rpcs3\Emu\Cell\SPUThread.cpp:1122)

And also you should re-rip your game from your PS3. (because even if i don't decrypt the 2 prx files, game still doesn't close.)

edit: LOG: https://gist.github.com/Nezarn/e13cc678c...f6b9a5b4d9

-----------------------------------------------------------------------------------------------
Well I have an issue. I don't have the 2 sprx files in my USRDIR\DATA\PRX folder.
Instead I have:



[Image: 6WFsc]



Currently under the USRDIR file is: Export(folder), BOOT.bin, bootloader.psarc.66600, bootloader.psarc.66601, bootloader.psarc.66602, bootloader.psarc.66603, bootloader.psarc.66604, bootloader.psarc.66605, bootloader.psarc.66606, bootloader.psarc.66607, bootloader.psarc.66608, bootloader.psarc.66609, bootloader.psarc.66610, bootloader.psarc.66611, bootloader.psarc.66612, EBOOT.bin

Also, I'm bad for not mentioning this earlier. But I didn't rip it from a PS3 disc. Got it online.

Anything else I can do to get it to work?

Welp I just realized something about my copy. It's Journey Collectors edition. So it has three other games with it. In other words, I'm a dumb dumb. Guessing this makes a great impact. Any other suggestions on what I would to do?