+- RPCS3 Forums (https://forums.rpcs3.net)
+-- Forum: Support & Issues (https://forums.rpcs3.net/forumdisplay.php?fid=17)
+--- Forum: Support (https://forums.rpcs3.net/forumdisplay.php?fid=18)
+--- Thread: Mostly black screen (/showthread.php?tid=190617)
RE: Mostly black screen - Skeletonsnax - 07-04-2017
Okay, took the newest version of today (as well as the version on 6/30), did the installs of everything and it's a black screen. Even saw some YT videos and I have black screen. Not that it's important but in this case I was trying to run Scott Pilgrim and only see the one logo, with sounds then everything else is black screen.
To note, I'm running this on my W7 laptop, and when I copied the exact folder onto a W10 computer it all works just fine. So....... I'm at a loss.
RE: Mostly black screen - Ani - 07-04-2017
Please zip RPCS3.log and upload it as an attachment so we can see what's wrong.
Do note that nearly all YouTube tutorials out there misleading, always prefer the Quickstart guide on the website.
What's the hardware on your laptop? Do you have latest video drivers on it?
RE: Mostly black screen - Skeletonsnax - 07-04-2017
First, I know I'm probably doing the log file wrong, so feel free to smack my fingers on that. That being said, my laptop has a GeForce 630m graphics card with an i5 processor and W7. I've got a handful of emulators and haven't had any issues like this with them, so I'm completely lost here.
Wait, I believe I've found the log. As for my laptop...
Windows 7 (64-bit)
i5 processor (3rd gen)
GeForce 630M graphics
8gb Ram
Rolling back to my comment about YT, that was for comparing the settings to other people that had their copy of the game running. I did the firmware install, PKG install of the game, the mentioned dl's according to the startup instructions and so on.
RE: Mostly black screen - Ani - 07-04-2017
PPU Decoder: Interpreter (fast)
Set it to Recompiler
Frame limit: Off
Set it to 60
RE: Mostly black screen - charles8181 - 07-04-2017
Hi I'm new to this forum as well as to this software that i am using RPCS3, i followed the instructions to the T. Then i used the data from a game that i already bought ninja gaiden sigma 2 everything is setup properly and i still can't play a game when i boot the game my system and drives meet the requirements to run this software as well as the games their is no overclocking the menu to rpcs3 pull up but you still can't load a game when i it says not responding i then went to the folder to load the .bin file of the game white screen and then not responding but it works for everyone else on youtube.
I repeat this is not a download just a data copy of the game i bought just to test the software. I just want to take my games with me everywhere i go that is the reason i am trying this on my laptop and it is compatible with the software.RE: Mostly black screen - Ani - 07-04-2017
Check the compatibility List first
https://rpcs3.net/compatibility?g=ninja+gaiden
And read how to report issues and ask for support
http://www.emunewz.net/forum/showthread.php?tid=171465
RE: Mostly black screen - charles8181 - 07-04-2017
RPCS3 v0.0.2-3-6561dda Alpha
E {rsx::thread} RSX: OpenGL: initialization of glDepthBoundsEXT failed.
E {rsx::thread} RSX: OpenGL: initialization of glGetTextureImageEXT failed.
E {rsx::thread} RSX: OpenGL: initialization of glGetTextureImage failed.
E {rsx::thread} RSX: OpenGL: initialization of glTextureBufferRange failed.
E {rsx::thread} RSX: OpenGL: initialization of glCopyImageSubData failed.
E {rsx::thread} RSX: OpenGL: initialization of glTextureBarrier failed.
E {rsx::thread} RSX: OpenGL: initialization of glTextureBarrierNV failed.
F {rsx::thread} class std::runtime_error thrown: Failed to initialize OpenGL renderer. ARB_direct_state_access or EXT_direct_state_access is required but not supported by your GPU this is what i get when i load a game and then the white screen.
RE: Mostly black screen - Ani - 07-04-2017
Please read the thread I sent above on how to actually report issues. I removed the console output, attach a proper compressed RPCS3.log file.
Anyways, before that, make sure your laptop meets the requirements listed on the website. It seems that that is not the case, as your GPU doesn't seem to support OpenGL 4.3.
RE: Mostly black screen - charles8181 - 07-04-2017
About that post normally i would get an extra white screen but now the program just freezes. I am leaving it running to see what else it do but if i touch it with the mouse pad it will freeze that is an excellent answer but i am thinking that is a possible fix but at the same time it acts as if their is an update needed because now it is loading a normal dialog box it's looking GOOD i will inform you later on the situation.
RE: Mostly black screen - Ani - 07-04-2017
I have removed the copy paste from the post above. Please read what I just replied beforehand.
If your GPU doesn't support OpenGL 4.3, RPCS3 won't work.