01-13-2023, 10:20 AM
- SYS: RPCS3 v0.0.26-14568-1852b370 Alpha | master
- SYS: 13th Gen Intel® Core™ i7-13700K | 24 Threads | 31.75 GiB RAM | TSC: 3.418GHz | AVX+ | FMA3
- SYS: Operating system: Windows, Major: 10, Minor: 0, Build: 22621, Service Pack: none, Compatibility mode: 0
- SYS: Current Time: 2023-01-12T20:18:52
- RSX: Found vulkan-compatible GPU: 'NVIDIA GeForce GTX 1070 Ti' running on driver 528.2.0.0
- SYS: Firmware version: 4.84
The game is very stable.
However, with the default settings in RPCS3, in missions that require some specific weapons and tools, I cannot start the mission even after adding certain weapons and tools to my equipment.
This was solved by adding a custom setting. I solved this by going to the Network tab in the settings and changing the Network Status from Disconected to Connected and also changing the PSN Status from Disconnected to Simulated.
So far, everything is working fine.
- SYS: 13th Gen Intel® Core™ i7-13700K | 24 Threads | 31.75 GiB RAM | TSC: 3.418GHz | AVX+ | FMA3
- SYS: Operating system: Windows, Major: 10, Minor: 0, Build: 22621, Service Pack: none, Compatibility mode: 0
- SYS: Current Time: 2023-01-12T20:18:52
- RSX: Found vulkan-compatible GPU: 'NVIDIA GeForce GTX 1070 Ti' running on driver 528.2.0.0
- SYS: Firmware version: 4.84
The game is very stable.
However, with the default settings in RPCS3, in missions that require some specific weapons and tools, I cannot start the mission even after adding certain weapons and tools to my equipment.
This was solved by adding a custom setting. I solved this by going to the Network tab in the settings and changing the Network Status from Disconected to Connected and also changing the PSN Status from Disconnected to Simulated.
So far, everything is working fine.