11-21-2019, 01:07 PM
I'm having problem with PS4 controler detection.
While pluging it by wire to pc the device instals properly and is detected by steam and DS4Windows without problems, all buttons are working etc.
DS4 was instaled after i realized the controler was not recognized on RPCS.
Firstly when I tried to set it in Pads settings and selecing "DualShock 4" in handlers all the devices "DS4Pad #1-7" were disconected.
Although controller shows up under "MMJoystick" the only things that react are
triger thesholds L1,R1 and both analog deadzones. Trying to reconfigure buttons brings no results.
Later i tried to set controller with DS4 turnd on but it only added another Joystick to the list of devices.
I tried to set controler on
rpcs3-v0.0.5-7764-039f8e1f_win64
rpcs3-v0.0.6-8420-230c3d55_win64
rpcs3-v0.0.7-9160-8d5ef2c7_win64
versions of RPCS without succes.
Im using win7.
If anyone have any ideas as to what may be a reason of this problem i would be gratefull.
Update: I've tried to set pad as controller on 2 other pc (both win7) and in both cases it remained undetected. Is it plausible that the controler is chinese fake?
While pluging it by wire to pc the device instals properly and is detected by steam and DS4Windows without problems, all buttons are working etc.
DS4 was instaled after i realized the controler was not recognized on RPCS.
Firstly when I tried to set it in Pads settings and selecing "DualShock 4" in handlers all the devices "DS4Pad #1-7" were disconected.
Although controller shows up under "MMJoystick" the only things that react are
triger thesholds L1,R1 and both analog deadzones. Trying to reconfigure buttons brings no results.
Later i tried to set controller with DS4 turnd on but it only added another Joystick to the list of devices.
I tried to set controler on
rpcs3-v0.0.5-7764-039f8e1f_win64
rpcs3-v0.0.6-8420-230c3d55_win64
rpcs3-v0.0.7-9160-8d5ef2c7_win64
versions of RPCS without succes.
Im using win7.
If anyone have any ideas as to what may be a reason of this problem i would be gratefull.
Update: I've tried to set pad as controller on 2 other pc (both win7) and in both cases it remained undetected. Is it plausible that the controler is chinese fake?