RPCS3 Forums

Full Version: Problem: every game doesn't run..
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
HI,

i have tried some games, but every game doesn't run on my pc.

I tried 4 games: tekken tag tournament 2, Contra Hard Corps Uprising (not a demanding game, i suppose) and King of Fighters XIII and Castlevania Symphony of the night (from PS1).

Both With OPENGL and Vulkan, the cpu is at 100% (96% for RCPS3). After the initial loadingpop up (PSU loading...), Tekken doesn't starts (black screen, after loading the proile and create the save state) adn Contra Hard Corps starts with the animated opening, but it doesn't run correctly;so I push START but there is a black screen and the game doesn't starts...
King of fighters XII starts but there are problems during the opening and during the game the fps are at 180/200!!!
Castlevania Symphony of the night after the compiling pop up, shows a black screen and my cpu run at 100%

Here my current config:
cpu: i5 4690K overclocked to 4.2Ghz
gpu: GTX 970 G1 gaming
RAM: 8 GB DDR3

My current pc isn't bad, is it possibe that my overclocked cpu isn't enough????

thank you
better post the log file. so others can see if they have run into the same bug.
sure. So i Have to run every game and post the 4 log files, one for each game. Where i can find the log file of the game that is running?
The logs are in the RPCS3 folder, once you ran the game and experience the error close rpcs3 (and don't re-open it) then go to the rpcs3 folder and look for the RPCS3.log.gz file.
Attach it to your post then run the next game and continue doing so until you've got logs for all 4 games. Keep in mind the best place to ask for support is likely on discord https://discord.me/RPCS3 in the #help channel as you'll recieve a reply much faster.
(08-22-2018, 09:35 AM)Asinine Wrote: [ -> ]The logs are in the RPCS3 folder, once you ran the game and experience the error close rpcs3 (and don't re-open it) then go to the rpcs3 folder and look for the RPCS3.log.gz file.
Attach it to your post then run the next game and continue doing so until you've got logs for all 4 games. Keep in mind the best place to ask for support is likely on discord https://discord.me/RPCS3 in the #help channel as you'll recieve a reply much faster.

thanks!

I attached the 4 logs. And here 4 images taken from every game.

1) Castlevania Symphony of the Night (a Playstation 1 game).  The game doesn't start. Black screen and CPU at maximum
https://s33.postimg.cc/aup8qt1kv/Immagine1.png

2) Hard corps Uprising. The opening starts but with a lot of glithces. CPU at maximum and fps at 1700!!!!!
https://s33.postimg.cc/tob1nuhtb/Immagine2.png

3) Tekken Tag Tournament 2. The game doesn't start. Black screen and CPU at maximum
https://s33.postimg.cc/e2tq3x0q7/Immagine3.png

4) King of Fighters XIII. The game starts, but fps are really high, it is not possible to play
https://s33.postimg.cc/dq2bxrl1b/Immagine4.png

Yes thanks i know Discord but it is a chat...it isn't so easy to explain the issue and attach the files...do you want i add this issue in Discord too?

thank you![attachment=9896][attachment=9897][attachment=9898][attachment=9899]
Having the same issues with Bleach: Resurreccion and Demon Souls. Hanging on Logo's at random times with the i5-4690k. I have also read a few other posts related to hanging with the 4690k.
If FPS are too high, just use frame limiter.

For Tekken Tag Tournament 2 you're missing RAP files for some extra content you've installed.
(08-24-2018, 05:52 PM)Ani Wrote: [ -> ]If FPS are too high, just use frame limiter.

For Tekken Tag Tournament 2 you're missing RAP files for some extra content you've installed.

ok, how can I limit fps? And how can i install .rap files? I only know how to install pkg...
thanks
> ok, how can I limit fps?
I literally answered that in the comment you quoted, use frame limiter in GPU settings.

> And how can i install .rap files? I only know how to install pkg...
Read the Quickstart Guide, it explains briefly how to dump your game licenses from your console and where to place them in RPCS3
(08-24-2018, 10:07 PM)Ani Wrote: [ -> ]> ok, how can I limit fps?
I literally answered that in the comment you quoted, use frame limiter in GPU settings.

> And how can i install .rap files? I only know how to install pkg...
Read the Quickstart Guide, it explains briefly how to dump your game licenses from your console and where to place them in RPCS3

thanks! Well, i limited fps to 60 and i installed the rapo files in Tekken. Attached the new logs

1) Castlevania: it doesn't work. 0fps, 100% cpu
2) Contra Hard Corps: opening is now ok, it works well. But the game doesn't starts
3) Tekken tag 2: only the initial pop up are now available. But the game doesn't start again...
4) King of fighters: now it is playable. Opening is ok, game is ok. There are some issue related to the fps: it happens before to start the match, that the fps decrease from 60 to 30/40. In the log attached i exit exacly when it happened

thank you