RPCS3 Forums

RPCS3 v0.0.3-5594-c9d06b09
load liblv2.sprx only otherwise nothing but a white screen
goes ingame and is playable
no problems so far

RPCS3 v0.0.3-6-795da10 Alpha
Intel® Core™ i7-3930K CPU @ 3.20GHz | 12 Threads | 11.92 GiB RAM | AVX
the game is Playable 60 fps all the time
and not even using 10% of the cpu

RPCS3 v0.0.3-3-e6a07e8 Alpha
Intel® Core™ i5-6500 CPU @ 3.20GHz | 4 Threads | 7.97 GiB RAM | AVX | TSX

Needs "Load liblv2.sprx only" enabled in the CPU settings otherwise it will not go ingame, crashing the emulator with a segfault. The game runs extremely well, being too fast to be playable unless the framerate is capped.

RPCS3 v0.0.3-6-795da10 Alpha
Intel® Core™ i7-3930K CPU @ 3.20GHz | 12 Threads | 11.92 GiB RAM | AVX
the game is Playable 60 fps all the time
and not even using 10% of the cpu

running good
https://youtu.be/aZqcrOz5Flk

successfully played Hard Corps Uprising NPUB30096 yesterday. but it was trial version and it was just one first level. but now i trying to load Hard Corps: Uprising - [NPEB00332] and it only loads black screen with errrors
E {PPU[0x100000d] Thread (mpfw trophy) [0x013042c4]} sceNpTrophy: sceNpTrophyRegisterContext(context=0x1, handle=0x1, statusCb=0xbdc6f0, arg=0x506b5228, options=0x1)
E {PPU[0x1000007] Thread (20131a30) [0x0091c8c0]} 'sys_fs_open' failed with 0x80010006 : CELL_ENOENT, “/dev_hdd0/game/NPEB00332/USRDIR/DataPS3/Gui/Xml/JP/mini_loading.bin” [1]
E {PPU[0x1000007] Thread (20131a30) [0x0091c8c0]} 'sys_fs_open' failed with 0x80010006 : CELL_ENOENT, “/dev_hdd0/game/NPEB00332/USRDIR/DataPS3/Gui/Xml/JP/mini_loading.bin” [2]
at any settings

Hello,

I can't get this game to work on latest build (v0.0.5-7019). Tested all possible GPU/PPU/SPU combinations.
Black screen after the intro video.

Full log attached.

Regards.

HI,

I think it stopped working somewhere between v0.0.4-6268-8b31a944 and v0.0.5-6498-7233640c. Same problem as the post above.

I'm pretty sure this is NOT playable anymore since all binaries where this game was actually finishable are removed from this site. Should be moved back to Intro.

Tested on 

RPCS3 v0.0.5-7320-fb5cdf97 Alpha | HEAD
Intel® Core™ i5-7400 CPU @ 3.00GHz | 4 Threads | 15.94 GiB RAM | AVX+

Tried every single settings combination, still does not work.

Same old hang after the video. It doesn't matter if player presses the start button to skip the video or watches it fully.

Did you try LLE'ing Libvdec.sprx?
Select "load automatic and manual libraries" then search for "libvdec.sprx" and tick it and restart the game.